|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » corsa c20xe » Post Reply
|
Rigby |
posted on 7th Jun 16 at 18:17 |
changed the the dizzy and rotary arm all ready mate and the spark is pretty decent | |
Tiger |
posted on 7th Jun 16 at 18:15 |
An engine needs fuel, spark and compression to run, you've got all of these so somewhere there's an issue with one of them. Is the spark strong enough. Could be a faulty ignition? After that, I'm at a loss. | |
Rigby |
posted on 7th Jun 16 at 17:35 |
yes loads at the rail | |
Tiger |
posted on 7th Jun 16 at 17:30 |
fuel pressure issue? | |
Rigby |
posted on 7th Jun 16 at 17:24 |
yer theres a spark,fuel,compression, and timing is right | |
Tiger |
posted on 7th Jun 16 at 17:17 |
Is there a spark? | |
Rigby |
posted on 7th Jun 16 at 16:50 |
its just doesnt offer just tuns and tuns never offers to start | |
Nic Barnes |
posted on 7th Jun 16 at 09:34 |
see where you say it doesn't offer to start, do you mean it won't crank over or it spins just won't fire up? | |
Rigby |
posted on 7th Jun 16 at 07:06 |
It will always be cold when I start it | |
Tiger |
posted on 7th Jun 16 at 05:44 |
Starting your car at or near to its full operating temperature. | |
Rigby |
posted on 6th Jun 16 at 22:02 |
Haha I won't mate, what are hot start issues, I never let it get hot | |
Tiger |
posted on 6th Jun 16 at 21:44 |
Hot start issues are normally crank or cam sensor issues I've found. I'd be looking at ruling those out first, just don't come beating my door down if it doesn't fix it :lol: | |
Rigby |
posted on 6th Jun 16 at 21:37 |
Could it be any other reason why this happening? Or do you reckon it will be just them two | |
Rigby |
posted on 6th Jun 16 at 21:36 |
How would you change that? And do you reckon that why my car is doing what it's doing? How much does it cost aswell mate? | |
Tiger |
posted on 6th Jun 16 at 21:29 |
At a guess you'd have to unbolt the assembly and it'll be inside the dizzy housing. It could be contributing to your car not starting but it could be other things also. It's a starting point though if you say you've done your crank sensor. | |
Rigby |
posted on 6th Jun 16 at 21:16 |
How would you change that? And do you reckon that why my car is doing what it's doing? How much does it cost aswell mate? | |
Tiger |
posted on 6th Jun 16 at 20:27 |
| |
Rigby |
posted on 6th Jun 16 at 20:16 |
You got a picture of what they look like mate | |
Tiger |
posted on 6th Jun 16 at 19:37 |
It's a small black plastic box sticking up out of the metal dizzy housing. | |
Rigby |
posted on 6th Jun 16 at 19:23 |
where abouts in the engine its a dizzy? | |
Tiger |
posted on 6th Jun 16 at 19:13 |
Tells the ECU what position the pistons are in and the camshaft speed. | |
Rigby |
posted on 6th Jun 16 at 19:05 |
its got a new crank sensor and whats the cam sensor? | |
Tiger |
posted on 6th Jun 16 at 17:52 |
Cam or Crank position sensor at a guess. | |
Rigby |
posted on 6th Jun 16 at 17:30 |
i have a problem with my c20xe what it is if i leave it a day it will start first time but as soon as i try it again after i turned it off it doesnt even offer to start? also when it does start it has a terrible misfire? any help will be appreciated cheers |