|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » General Chat » Adjusting handbrake (corsa b) » Post Reply
|
RioVerde |
posted on 6th Mar 08 at 23:00 |
so do i need grease or not??????? | |
Stu-G |
posted on 5th Mar 08 at 22:03 |
just tighten it up with the adjuster in the middle of the rear beam, maul grips and a spanner will do the job, may need sum wd-40 but easy enough!! | |
RioVerde |
posted on 5th Mar 08 at 21:56 |
cheers mate | |
SCOTTY.1 |
posted on 5th Mar 08 at 21:50 |
normal clear grese should do the trick m8 it will b seized the part of the axle always is | |
Joe |
posted on 5th Mar 08 at 20:35 |
You can do it on the cable over the rear beam? | |
RioVerde |
posted on 5th Mar 08 at 20:34 |
what kinda grease ? | |
SCOTTY.1 |
posted on 5th Mar 08 at 19:37 |
yes mate the bearing just sits in the drum and always falls out when removing the drum so get an old rag an some grese:thumbs: | |
RioVerde |
posted on 5th Mar 08 at 19:31 |
My cousin (mechanic) is doing this at the weekend and said to get some wheel bearing grease as need to take the bearings out to do it,is this right?.....had new cables fitted about a year ago and the handbrake is really slack and does'nt hold well |