|
Ditch
|
posted on 26th May 05 at 15:48 |
quote: Originally posted by daveo
intresting, not sure how the head can be the same yet the gasket different ?!?!?!
thicker gasket to lower the compression, olivoil has already established this
|
jr
|
posted on 26th May 05 at 15:41 |
ive got a X14XE head on a c16xe bottom end on J18
[Edited on 26-05-2005 by jr]
|
daveo
|
posted on 26th May 05 at 15:15 |
intresting, not sure how the head can be the same yet the gasket different ?!?!?!
|
Ojc
|
posted on 26th May 05 at 15:12 |
Taken from Novaload
According to EPC the C and X16XE have the same partnumber for the cylinder head and also use the same valves and cams etc (interestingly they use the same cam for both inlet and exhaust)
im sure the C and X16 are supposed to have different heads so not sure whats going on there
the X16XEL is a different story, it appears to have the same valves as the C/X16XE, but the cams are the same as the X14XE, and the cylinder head is the same as the X14XE
The inlet manifolds are different on all 3 engines
interestingly the head gasket is different on the C16XE compared to the X16XE, i wonder if this is to do with the compression ratio increase from 10.5:1 to 11:1 that the C16XE was supposed to have??
|