|Not logged in [Login - Register]|
|You Are Not Registered Or Not Logged In|
Corsa Sport » Message Board » General Chat » wire through bulk head » Post Reply
||posted on 20th Jun 04 at 15:25|
ooh all done now. The grommit is the hardest part - i ended up taping the wire to a screw driver and poking that through the grommit. Worked a treat.
||posted on 20th Jun 04 at 13:51|
only took me about 5 mins, i was in the car, pushed the wire thru the grommet, had a mate pull it out the other end job dun
||posted on 20th Jun 04 at 13:39|
I found it a nightmare to get the amp wire through! The best method I found was to thread a metal wire through the amp wire, double it back, thread the chaser wire through, then use the wires as handles to really pull the amp wire through.
||posted on 20th Jun 04 at 12:45|
Or drill a new hole and put a new grommet in, most amp wiring kits come with the bits meeded to do they :)
||posted on 20th Jun 04 at 12:44|
oh there's 2 grommets is there? because i was planning on wiring it through the grommet beneath the glovebox about level with the shelf. I'm gonna need to take out the battery and coolant tank to make it easier aren't i? Also do i cut a whole in the grommet or can i just poke it through existing holes?
||posted on 20th Jun 04 at 12:43|
ahhhh i'm going to have to do this in my corsa shortly, transferring all my audio over soon so thanks for the pics m8 :)
||posted on 20th Jun 04 at 12:42|
||posted on 20th Jun 04 at 12:16|
take your glove box out, put it thru the grommet hole there
||posted on 20th Jun 04 at 12:14|
Need to put my positive amp wire through the bulk head to the battery. I know there is a grommit already there with vauxhall standard wiring in. However its really hard to reach into there with battery and coolant tank in place. Should i take out the coolant tank and then would it be much easier or is there another way? Cheers.