corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.6 16v in a 1.4 8v » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Cavey

posted on 11th Sep 03 at 20:39

Cheers mate, been wondering what had been done to it for a while now :p

I failed my MOT cause of that tiny little crack in the friggin corner of the windscreen ya know ! :P Had to get a new windscreen.

and yeah, i'm planning on getting everything from the same person now, how much would you do me the swap for ?


hopper

posted on 11th Sep 03 at 16:59

cavey as for the spec of your car when you brought it off me

standard engine with drilled air box, cat back mongoose stainless exhaust, lowered 40mm but they were nova springs, 2ltr 16v front brakes with mintex discs and vauxhall pads, elec sunroof from a 1989 carlton cdx, electric windows out of 1998 corsa sport.

i would try and get everyfin from the same car regardin the engine you want cuz with everyfin been electric controlled sometimes the ecu needs reprograming and thats a pain.

as for the lifters been noisy they were new at 100k


Cavey

posted on 10th Sep 03 at 21:57

Yeah, it's driving all right, started ticking though, and it's pissing me off ! And i want a bit more power/less mileage on it...

Not really done anything to it, i've added a go fast dent along the Passenger side, reckon it adds at least 10BHP :P

Done the ICE up a bit, that Kenny HU died, got a sony one and a few JBL bits in the boot.

ANYWAY... So you reckon it should be fine with the gearbox that's already in it ? Also, could i get an ECU from a different 1.6 16v ? would that work or not, at the moment, think it's just the engine that i'm looking at, although i have asked him if he could source the ECU, Loom etc..etc.. as well, fingers crossed


PeteMTBer

posted on 10th Sep 03 at 17:19

My mate picked a civic vti engine up in his rover 114 GTa. It was already slammed.
Cant of been a nice ride home.


anz

posted on 10th Sep 03 at 17:04

oooh, this is relavent for me

basically, how much u lookin for engine, ecu etc, ALL U NEED basically, not gearbox tho...


hopper

posted on 10th Sep 03 at 16:53

yeah cavey it is kev. glad to hear my old motors still goin. i got rid of the van, had an astra sport, got rid of that cuz want happy now got another k-reg sri same as my old un. wot else you done to it since you ad it off me.


Cybermonkey

posted on 10th Sep 03 at 10:08

His gearbox may be an F10. The only pre-1995 gearboxes above the F10 were the F13 for an SRi and the F15 for the GSi. The F10 gearbox is not suitable for the C16XE engine, but an F13 gearbox will be just fine. In fact, the F13 gearbox was used for GSi's after 1995.


Daimo B

posted on 10th Sep 03 at 09:45

Your car will ahve an F13 gearbox. GSi's come witha n F15 gearbox. But, you should be able to fit your current gearbox with no problems. Should just about hit the rev limiter in 5th as well (117mph).

ECU, u may need the chip in the key as well. Im nto 100% sure, but ry re-postnig this on Mig as they usually know there gibbons!


cobra148

posted on 10th Sep 03 at 09:43

If you can carry passengers in the rear with no problems, then you should be ok with an engine and box I would think.


Greasemonkey

posted on 10th Sep 03 at 09:32

Well i gotta pick up a C16Xe engine very soon, if i put the engine in the boot and remove the passenger seat and put the gearbox there will it be ok. Cars lowered 40mm on 17's!!!!


cobra148

posted on 10th Sep 03 at 09:03

Mav, yes it will fit in the boot, you'll need two people to lift it in and out though.
Sorry, can't comment on the loom.


hopper

posted on 9th Sep 03 at 19:04

is your corsa reg k205 xhg


Mav 3000

posted on 9th Sep 03 at 18:59

I've got a couple of questions, cos my 16s have made my car so slow i need a bigger engine!

1) If i bought an engine, how do i pick it up and take it to the people doing the conversion? will it fit in my boot etc?

2) Does the engine loom plug into the car loom? where abouts? is it complicated and do the wires have to be run everywhere or is it a plug and play job?


Cavey

posted on 9th Sep 03 at 18:49

Haha, yeah, whatever gave you that idea ? I could do with talking to you about my Brakes actually


hopper

posted on 9th Sep 03 at 18:30

your name int adam by any chance is it?


Cavey

posted on 9th Sep 03 at 18:07

It's K reg, i've had it for a year and a bit now, pretty high mileage though


hopper

posted on 9th Sep 03 at 18:06

if your buyin a engine seperate from the loom etc you have be careful cuz a ecu from another car may not match, your best gettin everyfin from 1 car. cavey wot reg is your car, how long you had it.


Cavey

posted on 9th Sep 03 at 17:27

top...


dafydd

posted on 9th Sep 03 at 16:45

i may have a 1.6 16v engine box and everything you need for sale, out of a l reg gsi, send me a u2u if interested


Cavey

posted on 9th Sep 03 at 16:41

Right, just been to a bloke to ask about this Conversion...

He's saying i need like hopper has said, the Engine, loom, ECU etc..etc...

The engine i'm hopefully sourcing by itself, for a decent price... where could i get the ECU and anything else from, and what sort of price am i looking at ?

On another note... would i be better going for 2.0 8v ?

Thanks for any help

Oh, he's also saying the Gearbox would probably need changing too


hopper

posted on 6th Sep 03 at 09:38

alrite mate. it is a basic swop, you basicaly need everyfin from under the bonnet of a sport, ie engine, wireing loom, ecu. rnt sure bout the box you may be able use urs


Cavey

posted on 6th Sep 03 at 01:50

After having a quick search, i believe that it should be a straight swop, but the ratios on the gearbox are slightly different @ lower end...

Just want someone to confirm all this for me

It's a C16XE that i'm planning on btw...

I have a 1993 K REG @ the moment


Cavey

posted on 6th Sep 03 at 01:37

Looking at doing this, just wondering what i'm gonna need -:

ECU, Clutch, Gearbox ? any of that gonna have to be changed ?

Cheers people