|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa C head unit removal » Post Reply
|
Noonster |
posted on 14th Aug 03 at 08:18 |
LOL - I am gonna spray it just need the right colour paint :( | |
corsa-sxi |
posted on 14th Aug 03 at 08:09 |
noonster..spray it mate lol...can u remove my old hu for me lol then i cant put a new one in | |
Noonster |
posted on 14th Aug 03 at 07:56 |
:lol: - you need to negotiate, you dont have much luck do you :) | |
corsa-sxi |
posted on 13th Aug 03 at 22:09 |
hmm vaux are charging me £12 for removal..stupid arses | |
Red_SXi |
posted on 12th Aug 03 at 22:37 |
I bought the double Din pins from Halfords and they didnt work. So i took it to my Vauxhall dealership and they pulled it out for me with Vauxhall clips. | |
OzzySRi |
posted on 10th Aug 03 at 07:11 |
when i insterted the coathangers into the holes i could feel it 'engaging' the locking mechanisms. then i gave the HU a wiggle n a pull. Simple | |
Melville |
posted on 9th Aug 03 at 23:29 |
Am I doing summit f***en wrong or summit!!! (well obviously I am cos I cant get mine to budge lol) Ive bought the clips from Halfords and tried to remove it by wigling it left to right whilst pulling it out but the clips just keep on loosing there grips in the holes. Can anyone give me any advice on were Im going wrong?? | |
OzzySRi |
posted on 9th Aug 03 at 22:42 |
cheers for the help guys :thumbs: I used four bits of coathanger and out she came :D | |
Scotty_B |
posted on 9th Aug 03 at 11:17 |
What I did was take it to my Vaux (Holden) dealer and they pulled the unit out for me for no charge. | |
ROBSTA |
posted on 9th Aug 03 at 10:49 |
INTO THE HOES WHERE THE ALLEN KEYS WHERE | |
OzzySRi |
posted on 9th Aug 03 at 10:40 |
ive pulled out those allen srews n they seem to be ornamental. they didnt hold onto anyting. i got to the point where alot of the dash was stripped so i could get to the back of the unit but still no success. | |
Scotty_B |
posted on 9th Aug 03 at 09:04 |
Take out the 4 screws in each hole. You will need an allen key. Get double- | |
OzzySRi |
posted on 9th Aug 03 at 05:02 |
Help needed with removing HU. I dunno if this spec HU is used in the UK. Ive already had a go at it but with no success. Any help appreciated |