|
jasesaint
|
posted on 6th Aug 17 at 22:27 |
Excellent, will try thank you!
Although I stumbled upon a local auto-electrician that has thermal imaging cameras to show where current is 'leaking'.
Clever stuff!
|
jay.jay
|
posted on 4th Aug 17 at 06:27 |
You need to put a multimeter inline between the negative terminal and negative battery post when the car is locked and doors shut etc. Wait about 20 minutes and see what the current draw is. Should be no more than 0.03 amps ideally. If it's higher then you need to start pulling fuses one at a time to try and identify which circuit it is that's the issue. (Don't turn the ignition on with the multimeter in line!!) If it's been converted to 2.0 I'd check where they have taken the feed for the ECU etc.
|
jasesaint
|
posted on 3rd Aug 17 at 23:02 |
Hi,
Hoping someone can give advice or signposting to an auto-electrician?
I have a Corsa C20xe that was bought already modified. The issue I have is battery will drain after 4 or 5 days of being stood. It's had new battery and bigger rated batteries but issue remains. I disconnect a terminal which stops the issue but hoping to make it a daily drive soon but need reliability after long weekends etc.
Any ideas of a cause or someone that could look at in in Nort West or North East? Cheers
|