|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa C tracking after wishbone replacement » Post Reply
|
moka |
posted on 23rd May 17 at 11:48 |
It's a Corsa C SXI, with Corsa C Exclusiv alloys (16") on it instead of the standard SXI alloys on it (15"). | |
Ian |
posted on 23rd May 17 at 11:23 |
What wheels are on it? | |
moka |
posted on 23rd May 17 at 09:21 |
The car tracks straight, so I'm happy enough with that... But the car struggles to centre the steering wheel after turning... It kind of does but not properly until I centre it myself (then it will remain centred and track correctly). Is this because of the camber? | |
Ian |
posted on 23rd May 17 at 01:30 |
Do bear in mind the readings for the OSF camber are within 2 seconds of each other which is half of 1/1000th of a degree so they've not moved much, contrary to the picture which has gone from being massively wonky to dead straight. Presumably there are only three pictures. | |
monkeytwizzel |
posted on 22nd May 17 at 20:41 |
It would same that there is something wrong with your first arm you did,check there isn't model options. | |
moka |
posted on 2nd May 17 at 09:49 |
Replaced offside wishbone and got tracking done the other day (nearside wishbone replaced 2 months back) - is the camber something to worry about? I asked the garage there and then and they said nothing to worry about as it can't be adjusted anyway... |