|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Steering wheel boss and horn ring woes! » Post Reply
|
Ian |
posted on 16th Oct 16 at 20:17 |
Those splines are a bit of an interference fit as well, might find it'll seat down a bit more after you get a start on it. | |
megatron-uk |
posted on 16th Oct 16 at 18:47 |
Well, I managed to get a full refund for the boss and exchanged it for a new, non-airbag boss. | |
megatron-uk |
posted on 3rd Oct 16 at 21:02 |
If I take the squib off, then it all fits perfectly, still with a small gap between wheel and column shroud. I'm leaning to the fact that I was given the wrong wheel and squib. Which of course means, if that is the case, I need a non-airbag boss and a non-airbag wheel to get the horn ring from. | |
Ian |
posted on 3rd Oct 16 at 20:33 |
The columns are different although I've never seen that if its all from the same car. | |
megatron-uk |
posted on 3rd Oct 16 at 20:19 |
Now that's what I'm not sure about. The column and wheel came from a breaker on ebay - supposedly complete. But I've nothing to prove that it wasn't a column pulled from one shelf of bits and a wheel and squib pulled from another. I'm wondering if the non-airbag horn ring/squib is slightly shallower than the airbag one, which would let the wheel sit further down the splines, giving me enough threads to get the nut on. | |
Ian |
posted on 3rd Oct 16 at 20:12 |
Is it all from the same donor? | |
megatron-uk |
posted on 3rd Oct 16 at 20:01 |
Hi everyone, |