corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » corsa 1.4 limp mode » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

zakr1

posted on 10th Jul 15 at 19:27

hi all just had somebody else read the codes and come up with
p1120 accelerater pedal position sensor
p1122 accelerater pedal position sensor low voltage
p1550 limp home mode throttle position
also came up with
p0340, p0220, p0120, and p0335 which where cleared.
any help with the top three would be very helpful thank you


Ian

posted on 3rd Jul 15 at 00:05

Cam sensor error may indicate the timing is out.

I know its tempting to blame the sensor and want to change that, but if its telling you the truth and the timing is implausible then you may have other issues.

If you're talking about a Z14XEP 2005 ish onwards then you may be looking at stretching of the timing chain or wear on the chain guides.

Can also have timing problems on the early ones but the belts normally snap and you'd have full failure rather than the chain which will still run but give you codes.

Need to see the actual P codes as well.


ar corsagsi

posted on 2nd Jul 15 at 21:30

What fault codes are you getting? As theres a few related to cam sensor. You are resetting the codes after fitting the sensor as it is needed im sure.


zakr1

posted on 2nd Jul 15 at 20:41

hi yes was not cheap unit as was lucus part and am sure didnt damage any thing as now fitted two and both have the same outcome refit the old onethat according to code is faulty and engine starts and runs but in limp mode


Dee25790

posted on 2nd Jul 15 at 19:32

Using genuine parts? (Could be cheap shite) And are you certain you fitted the cam sensor right and didn't damage anything in the process?


zakr1

Icon depicting mood of post posted on 2nd Jul 15 at 19:22

hi all i have a corsa c 1.4 auto that has gone in to limp mode, there are no warning lights and have had the codes read and found fault on throttle body which i have changed and another code which was for cam censor which has been changed and now the car wont start so returned item and got another one and fitted with the same effect so now no further ahead any help would be really helpfull