|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » anyone put an f23 in a corsa b? » Post Reply
|
andyc1234 |
posted on 4th Sep 13 at 14:50 |
Yea thats what were going for astra mount cut into leg modded corsa rear mount and a couple of lugs on the crossmember for the front mount. Were just using normal big block shafts. | |
bigron1988 |
posted on 1st Sep 13 at 21:33 |
One of the foreign lads on my fb is doing it now , has cut a hole in the chassis leg to mount the Astra mount in it , making custom mounts for the front and rear, having custom driveshafts made to take extra power as its a drag car | |
monkeytwizzel |
posted on 1st Sep 13 at 21:29 |
modifying to fit the saab box will be the same amount of work as the f23! | |
andyc1234 |
posted on 31st Aug 13 at 20:12 |
Sick of breaking f20s everytime it goes out. Not arsed about fitting hydraulic clutch and cable shifter | |
monkeytwizzel |
posted on 31st Aug 13 at 19:20 |
Far easier to use the old f20 or f28 for a corsa b conversion of any sort because of the mounts,hydraulic clutch and gear cables that you will have to convert to for a f23 conversion.Will be easier just to use a saab box than a f23 as it`s virtually a f25. | |
andyc1234 |
posted on 31st Aug 13 at 19:06 |
Building a saab corss and going for f23 instead of old f20s or f28s . I know a few zlet bs have been done but which version of the box. The vectra f23 mounts look closer to the corss ones that the zlet f23s as the mounts on top of the box |