corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » X18XE1 Immo problem » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Primey86

posted on 7th Oct 12 at 19:58

Sorted it mate, yeah it was that plug all along, didn't realise there were two of them!


.Matt

posted on 7th Oct 12 at 19:22

If you turn the key does it turn over?

if not then you dont have the start and charge plugged in...

the plug for this can be found down the back of the engine.

the grey plug from the vectra loom goes into the injector loom that should be on the top side of the engine.


Primey86

posted on 6th Oct 12 at 21:42

Going to have a double check of all wiring tomorrow


tobyc20xe

posted on 6th Oct 12 at 20:31

quote:
Originally posted by Primey86
Not that I know of, light no longer flashes?

Done paper clip test & got these, this is from new ecu that I've just bought

1110
0135
0443
0403
1614
1612
1613

Any clues?



the "new" ECU you have got will probs be flashing out old codes mate so may be pointless.


Primey86

posted on 6th Oct 12 at 15:24

Not that I know of, light no longer flashes?

Done paper clip test & got these, this is from new ecu that I've just bought

1110
0135
0443
0403
1614
1612
1613

Any clues?


pete8v

posted on 6th Oct 12 at 14:45

cant you bypass the immobiliser ?


Primey86

posted on 6th Oct 12 at 13:18

It must definitely be an immob issue, will that stop the ignition turning the starter? Tested a jump lead on starter yesterday & it turned over, so there's definitely something wrong?


tobyc20xe

posted on 6th Oct 12 at 07:51

a lad on here davegreen used a vectra look i think mate u2u him and ask my looms way diffrent to that but il have a look at your pics tonight after work.


Primey86

posted on 5th Oct 12 at 17:59

Here's some pictures showing how i've wired it up

http://imgur.com/a/mNHW0/embed

Any help is appreciated.

[Edited on 05-10-2012 by Primey86]


Primey86

posted on 5th Oct 12 at 17:51

Fitted ECU/Transponder & Chip and still nothing, just flashes EML light, doesn't even turn the starter motor?

I'm seriously getting annoyed with it now lol.


Primey86

posted on 3rd Oct 12 at 23:33

will let you know pal, cheers.


tobyc20xe

posted on 3rd Oct 12 at 23:17

quote:
Originally posted by Primey86
Bought ECU kit from ebay, give that a go


i could be back in bfd for the weekend if you still need a hand mate


Primey86

posted on 3rd Oct 12 at 22:20

Bought ECU kit from ebay, give that a go


tobyc20xe

posted on 3rd Oct 12 at 22:17

quote:
Originally posted by Primey86
Just at work at minute, will grab some tomorrow morning, any clue on immobiliser?


yes there should be two grey plugs one on the corsa loom and one on the vectra loom try the vectra one first.

i may not be right as am going on what i did with my car and my engine loom is diffrent to yours, but give it ago.


Primey86

posted on 3rd Oct 12 at 13:45

Just at work at minute, will grab some tomorrow morning, any clue on immobiliser?


tobyc20xe

posted on 3rd Oct 12 at 13:16

get some pics up for witch ones mate ol ne able to help you


Primey86

posted on 3rd Oct 12 at 10:30

Just tried same chip in my other spare corsa key and now the EML doesn't flash at all, just constantly lit up.

Another thing, the grey plug from starting charging loom on the corsa, i connect this to the vectra loom the temp gauge shoots up, but when i connect vectra grey to plug to grey plug the temp doesn't budge?

There's also 2 connectors for what i think is crankshaft sensor, 1 connector on the corsa starting charging loom & 1 connector on vectra loom, which am i connecting?


Primey86

posted on 3rd Oct 12 at 09:35

Done this conversion last weekend and managed to get it all wired up following daveylc guide.

Swapped, chip/imob from known working vectra over to corsa, all i get is a flashing EML light, temp gauge shoots up too, can hear the fuel pump kicking in when i turn the key.

Anyone any ideas?