|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » rate this gasket sealer? » Post Reply
|
DERV-POWER |
posted on 27th Apr 12 at 21:04 |
quote: no | |
Jed D |
posted on 26th Apr 12 at 20:22 |
so is the one in question no good^^? | |
D0NN3R |
posted on 26th Apr 12 at 17:51 |
i use vauxhall gasket sealant good stuff | |
DERV-POWER |
posted on 26th Apr 12 at 17:27 |
this is what i use http://www.ebay.co.uk/itm/UNIVERSAL-BLUE-HYLOMAR-GASKET-SEALANT-100G-/130555089468?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e65b0923c | |
HarleyMK |
posted on 26th Apr 12 at 15:09 |
Yeah but if there's any residue on the inside of the seal that can come in contact with the oil it can cause bits to break off which will get into the oil pump, | |
Jed D |
posted on 26th Apr 12 at 14:44 |
it'll be long dried before the engine gets running like... | |
HarleyMK |
posted on 26th Apr 12 at 14:05 |
Be careful with silicone based sealants as they contaminate oil, only use a little bit as you don't want it weeping over the edges inside your engine as its can cause the oil pump to block up | |
davieslim |
posted on 26th Apr 12 at 13:56 |
i use this on everything | |
Jed D |
posted on 26th Apr 12 at 07:49 |
a mate said he once used stuff that stayed a bit tacky and it blocked his oil pump and everything up :( | |
jay26 |
posted on 26th Apr 12 at 06:38 |
I used tigerseal on my crank end cap | |
Jed D |
posted on 26th Apr 12 at 05:41 |
a few things, 1. being putting the crank back in on a XE, its needs a bit of sealer around the flywheel side behind the crank shaft oil seal if you know were i mean? | |
DERV-POWER |
posted on 25th Apr 12 at 21:33 |
what do you need it for | |
Jed D |
posted on 25th Apr 12 at 20:25 |
http://www.ebay.co.uk/itm/K2-BLACK-RTV-SILICONE-SEALANT-INSTANT-GASKET-HIGH-TEMP-350-C-300g-CARTIDGE-/200748170594?pt=UK_Body_Shop_Supplies_Paint&hash=item2ebd85fd62#ht_917wt_1344 |