corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » 1.2 Sxi to x16xe wiring question (pic) » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

moddedcorsa

posted on 29th Feb 12 at 00:19

yeah it is jamie (bought the car without its engine, so not 100% on what goes where)


Linch

posted on 28th Feb 12 at 15:32

One At the bottom is reverse light sensor, grey plugs are ingnition plugs if they come from separate places.


jamieSxi

posted on 28th Feb 12 at 12:44

Is this a 1.2 sxi loom??


moddedcorsa

posted on 28th Feb 12 at 01:04

Can anyone clarify what the above un-labled plugs are?

Also do the 2 grey ones plug together?


moddedcorsa

posted on 28th Feb 12 at 00:56

Thanks matt, just had a read of that. Seems the wiring is just as easy as any other corsa conversion only a bit more time consuming :thumbs:

[Edited on 28-02-2012 by moddedcorsa]


.Matt

posted on 26th Feb 12 at 21:14

This is a post of a 1.2 to 2.0,

I guess you will need to find 1.6 to 2.0 which wont be hard and just get the colours and match

http://www.corsasport.co.uk/board/viewthread.php?tid=611430&highlight=1&pid=8039226#pid8039226


moddedcorsa

posted on 26th Feb 12 at 20:29

lol, this isnt answering my original question, or any help on the wiring. Ill probably just grab a haynes manual and spend time figuring it out myself, as nobody seems to know (which i find hard to believe, as this engine has probably been removed for conversions for over 10 years now)


one-mr-t

posted on 25th Feb 12 at 21:01

Change it all to the hydrolic power steering much better


moddedcorsa

posted on 24th Feb 12 at 23:18

hmm, then the epas wont work, as the fuse box with it is smaller to account for the motor sticking out the coloumn. Really want to keep this..


Dan H

posted on 24th Feb 12 at 12:20

get a new dash loom from an 1.2/1.4 8v or 1.4/1.6 16v and change it oer, should be plug and play after that


moddedcorsa

posted on 24th Feb 12 at 12:10

Whats the most common method? As there must be loads of converted sxi's


one-mr-t

posted on 24th Feb 12 at 08:49

Fuel pump will be fine, you can either change the dash loom to a sport one or butcher the one that's already there


moddedcorsa

posted on 23rd Feb 12 at 23:31

Hi, just got a w-reg 1.2 16v sxi. The car has no engine, but ive a x16xe i intend to rebuild and fit.

Just wondering if any1 can identify what the following plugs are?

Starter and altenator ive labled,
Speedo drive appears to be top (with orange water seal)
And the big plug with the clamp (and orange water seal is the ecu)



Also when i run the x16 loom into the car down in the drivers footwell, will the feeds for it be there, or am i going to have to remove the dash and trace where they come from?

Only other question i have at the moment is the whether the sxi fuel pump will be up to the job, anybody know?

Cheers, Gary


[Edited on 28-02-2012 by moddedcorsa]