corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » NO SOUND?? Please help!! » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

16VCorsa

posted on 23rd Apr 03 at 10:28

I have checked all the cabling and also checked to see if it works on another amp and I get the same response on both amps. Only thing I can think of is to test the sub ob someone elses set up.

Thanks for you help buddy.


Richie

posted on 23rd Apr 03 at 10:02

check your ground again it could have come loose, and see if the protection light come up on the amp.

Its unlikely you would have blown it up in 2 mins.


16VCorsa

posted on 23rd Apr 03 at 09:15

Thanks guys for your help. I did the above and it worked. BUT I think I may have blown the sub cos it played for about 2 minutes then switched itself off. Do you think this is the case.

The amp is a 1200 watt 2 channel 2 ohm stable amp and the sub is a solo baric kicker.


Richie

posted on 22nd Apr 03 at 16:38

you need to go into a setting while the headunit is switched off. Think its something like hold down FUNC when the headunit is in standby. In there you will be able to turn sub control ON.

If that doesnt work but it should, check the ground on your amp.


Mikorsa16v

posted on 22nd Apr 03 at 15:51

-try turning the sub volume setting up, might be on 0 as default (on headunit)?

-have u tuned the gain and crossover dials on the amp? if not do so
gain should be at 75%
not sure on crossover - depends

wired incorrectly from the amp?

[Edited on 22-04-2003 by Mikorsa16v]


16VCorsa

posted on 22nd Apr 03 at 14:58

Hi just recently bought a Pioneer DEH P7450 headunit and a amp. I'm trying to connect a sub up to it. Now I have managed to connect everything up and there is power going into the amp and music plays an all. But there is no sound coming out of my sub. I know everything is working correctly cos I have tested everything on my mates headunit and my headunit is working cos I tested the preouts with a house stereo and it played the sounds. Does anyone know if there is a setting on my headunit that needs to be turned on before the sub woofer can be used.

Any advice will be appreciated.

Thanks