|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa b 1.0 12v conversion to 2.0 16v c20xe questions » Post Reply
|
davidm |
posted on 5th Jan 12 at 16:49 |
quote: To clear things up.. corsa 12vs 1.4/6 sports have type 2 shells, the only ones that have type 1 is the 8vs with no PAS | |
Mr-SEH |
posted on 5th Jan 12 at 13:48 |
sorry to jump in but shaunmods says 12v use type 2? is this right as im doing the exact same! swapping my 2.0 from my 1.4 shell into a 1.0 and i heard i need a type 1 mount ? cheers :o | |
Stoneyginger |
posted on 27th Sep 11 at 20:33 |
im not putting electric windows back in the car, i have bought this shell because it has no sunroof and electric windows :) | |
AlexW |
posted on 27th Sep 11 at 17:01 |
If its got it in the first place, Will still need a bit of wiring. | |
shaunmods |
posted on 27th Sep 11 at 16:04 |
quote: harder if he wants to keep the EPAS though | |
AlexW |
posted on 27th Sep 11 at 07:41 |
I'd just swap the looms from the 1400 too, You can easily fit the elec windows etc then | |
Stoneyginger |
posted on 26th Sep 11 at 20:23 |
the speedo on my current 2.0 is electronic too so that is not a problem :). Thanks for the advice folks ;) im sure you will get more questions once i get started. | |
ianofbhills |
posted on 26th Sep 11 at 19:14 |
As has already been said just pull the wires required through the bulkhead and connect as usual due to the ecu on the 1.0 being in the engine bay. Its easier to actually do when its there in front of you rather then trying to describe it. | |
davieslim |
posted on 26th Sep 11 at 16:58 |
i did my old 1.0 was just a case of tracing the wires need from the ecu plug and pulling them through the bulk head and routing them to where the are on other models, most wires where easy but a few had to get put into the fuse box to keep everything right | |
Eddx14xe |
posted on 26th Sep 11 at 13:15 |
O right, thought they were different. My mistake. | |
shaunmods |
posted on 26th Sep 11 at 13:12 |
quote: 12v is type 2 Edd so mounts will be fine. | |
Eddx14xe |
posted on 26th Sep 11 at 13:07 |
Mounts might be different as well. Sport is a type 2 shell and the 1 litre will be a type 1 shell. | |
pow |
posted on 26th Sep 11 at 11:35 |
wiring will be different. IIRC you can pull the ECU plug back through the bulkhead and just chop off the wires you need :) | |
Stoneyginger |
posted on 25th Sep 11 at 21:06 |
Ive been thinking for a long time to change my car into a non sunroof shell that already has the electric power steering. I recently have aquired a corsa b 1.0 12v 2001 x reg with 40k miles so im going to reshell my car into it. Can anyone give me advice as to what is different with the 1.0 corsa b to the 1400 sport shell that my car is currently in. obviously i was going to just swap everything over into the new shell just wanted to check any differences. |