|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » How to wire in a cooling fan override switch » Post Reply
|
Gary |
posted on 4th Jul 11 at 15:14 |
If your not gonna use a 30amp switch as Dale suggested then you'll have to go the relay route. | |
Jed D |
posted on 3rd Jul 11 at 15:14 |
yeah just get another fog light switch out a scrapper its not hard to run the wires to it. i had to cut a little chunk out the bulk head lyk, only about 2cm. fused it under the scuttle panel too | |
gidged500 |
posted on 3rd Jul 11 at 13:41 |
That's really good and detailed info guys thank you very much for that really helps :) I'm thinking of wiring the switch into the dud button next to the fog light switch ? | |
dale87 |
posted on 3rd Jul 11 at 09:06 |
The best way for a fan override switch imo is to just splice the brown and white wire (iirc) at the fan switch sensor (botton of rad drivers side). Then run a wire from this to a switch then from the switch to earth. | |
Gary |
posted on 1st Jul 11 at 12:02 |
| |
Jed D |
posted on 1st Jul 11 at 09:15 |
i got another fog switch and put it were gsi's have the front fog switch. wired it all up under the scuttle panel, fused it etc... | |
gidged500 |
posted on 1st Jul 11 at 08:53 |
Just after finding out how to wire in a override switch for my cooling fan on my Corsa b , and what parts I need thanks in advance ;) G |