|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » ruff diameter of 1.2 16v centre and 1.0 12v centre » Post Reply
|
shaunmods |
posted on 22nd Mar 11 at 10:55 |
Providing you the 1.2 16v straight through pipe is the standard bore size for the 1.2/1.4 etc you will be able to get it to fit your 1.0 12v. 12v's have a small piece of conneting sleeve that goes between the downpipe and the mid box section. All I did with mine when I fitted a 1.2/1.4/1.6 centre on mine was connect it to this small sleeve and it went straight on. If you get under the car you'll see the bit I mean :) You will need a 1.2/1.4/1.6 backbox though as Dragon said :thumbs: | |
dragon2309 |
posted on 22nd Mar 11 at 00:09 |
I believe they'll sit on the same exhaust hangers, as they are in the same place. Looking at the info i have here, it LOOKS like the end of the cat downpipe sits in the same palce on both, but i cant be 100% on that, it looks very close. | |
Jabba |
posted on 21st Mar 11 at 23:58 |
yeh and cupple of last questions mate | |
dragon2309 |
posted on 21st Mar 11 at 23:56 |
Ah right, well i dont know which end of the centre section you are asking about, but lets assume you mean the backbox end of it. | |
Jabba |
posted on 21st Mar 11 at 23:18 |
sorry i forgot to put on the end centre section of the exhaust | |
dragon2309 |
posted on 21st Mar 11 at 23:15 |
you mean wheel centre bore? If so then all corsas are the same, even the 1.0 12v, they are all 56.6mm centre bore. | |
Jabba |
posted on 21st Mar 11 at 22:48 |
like the bore on the middle if you get what i mean | |
dragon2309 |
posted on 21st Mar 11 at 22:46 |
diameter of what?? | |
Jabba |
posted on 21st Mar 11 at 22:16 |
what are the ruff diameter of these 2 please?? |