|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » re aligning steering wheel » Post Reply
|
danbo |
posted on 24th Feb 11 at 20:35 |
i think ill go for in between lock to lock lol | |
Darryl H |
posted on 24th Feb 11 at 11:43 |
quote: Until you can't get it back on :lol: My Dad had a mate who did this and it wouldn't go back on - he ended up in a ditch | |
arizona ste |
posted on 24th Feb 11 at 09:48 |
i set mine while i was driving haha best way imo lol | |
corsamon |
posted on 23rd Feb 11 at 09:17 |
its about £15 quid around here for laser alignment for the front too, thought i wd say before ya ask how much it is :P | |
c20letandy1988 |
posted on 22nd Feb 11 at 21:55 |
or if that bothered mate go and get your tracking done then do what ellis said:Just ensure the wheels are facing dead straight then pull the wheel off and put it on straight, simples | |
naz-gsi |
posted on 22nd Feb 11 at 20:57 |
no problem | |
danbo |
posted on 22nd Feb 11 at 20:00 |
cheers for the help | |
naz-gsi |
posted on 22nd Feb 11 at 19:24 |
NO PAL | |
danbo |
posted on 22nd Feb 11 at 19:18 |
oh yer lock to lock would work, | |
naz-gsi |
posted on 22nd Feb 11 at 19:01 |
or go lock to lock normally 1 and a 1/2turn each side | |
Generation |
posted on 22nd Feb 11 at 18:26 |
Push it forward it will align itself | |
danbo |
posted on 22nd Feb 11 at 08:56 |
what about if the tracking is out? | |
Ellis |
posted on 21st Feb 11 at 20:39 |
Just ensure the wheels are facing dead straight then pull the wheel off and put it on straight, simples. | |
danbo |
posted on 21st Feb 11 at 16:46 |
hi i have a momo steering wheel, when I took it off the column i didn't mark the postion well enough, now i think i put it on slightly to one side but is there a way of making sure the steering wheel is centrailised properly? My track rod ends both have the same amount of thread showing so have been wound on same amount of times. Just want to remove steering wheel again centralise the column somehow then just put the wheel back on straight and it should then be right. |