corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » How do you set the boost on a c20let » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

craig_s

posted on 11th Jan 11 at 18:13

either get a manual boost controller or set it by the actuator.you will need an adjustable fuel pressure reg too.

either way take it to a rolling road to be set up,sounds like you dont know too much about them (dont take offence) so i wouldnt go messing with it.



[Edited on 11-01-2011 by craig_s]


Robo C20Let

posted on 11th Jan 11 at 08:48

0.6 for the gap
it replaces the amal valve but leave it plugged in

the boost controller (depending on type) goes between the turbo and the actuator (boost pipes) should have a pipe from the exhuast side of the turbo into the boost controller and then to the actuator.


Corsa_Sport21

posted on 10th Jan 11 at 22:31

Yes it replaces the amal valve,but you still need to leave it plugged in.Can also adjust it via the actuator if you dont have an MBC.Think the plugs need to be gapped to 0.6mm but im sure some1 in the know will correct this.


whitesport

posted on 10th Jan 11 at 18:38

where does the manual boost controller go? does it replace the amal valve?
I already have a fpr and am running ngk plugs, what gap are they meant to be?


Corsa_Sport21

posted on 10th Jan 11 at 16:25

Probably need to change/re-gap the plugs too.


Robo C20Let

posted on 10th Jan 11 at 12:24

get a manual boost controller and an adjustable fuel regualtor and then its easy


c20letandy1988

posted on 9th Jan 11 at 16:00

best thing mate what ive done is google it as a question it comes up with diffrent forums and people that have asked simular questions?


whitesport

posted on 8th Jan 11 at 17:40

sorry, yea i mean on the c20let engine


fillmecca

posted on 8th Jan 11 at 16:04

clet? :S i take it you mean a C20let?


whitesport

posted on 8th Jan 11 at 14:59

As above, i ve put phase 2 chips into the ecu and was wanting to know how do you set it?


[Edited on 08-01-2011 by whitesport]