|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Repaired ignition barrel now issue turning it off! » Post Reply
|
AlexW |
posted on 11th Dec 10 at 20:18 |
Nope, that has a wiring fault, quite a bad one too. | |
Martin W |
posted on 11th Dec 10 at 19:27 |
quote: mine didnt do that mate. | |
ash-ov-boro |
posted on 11th Dec 10 at 02:12 |
lol my 1.0 12v you can stop put your brake in pull the key out as long as the brake is still in the car stays started only relised few weeks ago does anyone elses do this | |
AlexW |
posted on 9th Dec 10 at 03:00 |
If you turn the key to 1, does the ign come on? Or just the radio? | |
Matty.b1984 |
posted on 9th Dec 10 at 01:03 |
No I mean the engine stays on. The engine only goes off once I know remove the key. Before the ignition barrel and housing breaking it worked like a proper ignition should. | |
Piér |
posted on 9th Dec 10 at 00:48 |
Do you mean the engine is running? or just that the ignition stays on? | |
Matty.b1984 |
posted on 9th Dec 10 at 00:25 |
Didn't undo any so can't see it being that. Completely confused by it. | |
Martin W |
posted on 8th Dec 10 at 23:34 |
wires connecting up properly? | |
Matty.b1984 |
posted on 8th Dec 10 at 22:39 |
Hi all, I've finally managed to get my ignition barrel finished, fitted and starting. |