|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Knowledge of 17s needed » Post Reply
|
Frankee_B |
posted on 27th Mar 03 at 13:51 |
On the arch rolling thing: | |
Andy GSi |
posted on 27th Mar 03 at 12:02 |
i have 17" dare V1's lowered 40mm NO scrubbage at ALL even wiv full car load:D:D:D thats 205/40/17 et 45 | |
euro-corsa |
posted on 27th Mar 03 at 11:55 |
meant to say there et45 aswell! | |
euro-corsa |
posted on 27th Mar 03 at 11:54 |
am running bk racing 7x17s with 205/40s lowered on the 40mm gmax kit and theres no scrubbage :D | |
-Aliba- |
posted on 27th Mar 03 at 11:13 |
ttt | |
sxi_welshy_boy |
posted on 26th Mar 03 at 23:57 |
Do u have to take plastic liner out to cut it or could u just do it with a sharp stanley... is there ne pipes/lines/wires directly behind liner u could catch? | |
-Aliba- |
posted on 26th Mar 03 at 23:42 |
Another question i forgot to ask, | |
-Aliba- |
posted on 26th Mar 03 at 23:39 |
Amazing what a bit of moaning can do. ;) | |
Tim |
posted on 26th Mar 03 at 23:36 |
Each and every car is different due to manufacturing tolerances. Some obscure 17s may be availble in 6.5", especially Irmscher ones... | |
-Aliba- |
posted on 26th Mar 03 at 22:53 |
Are 17s available in 6.5" width???? | |
Richie |
posted on 26th Mar 03 at 22:22 |
ok, well et45 7" monzas on 40mm lowered corsa were fine, but on full lock and nasty corners there was some scrubbage, one time even took the corsa arch off. It involves trimming the arches. Never got round to it tho | |
-Aliba- |
posted on 26th Mar 03 at 22:18 |
Pretty please ;) | |
Richie |
posted on 26th Mar 03 at 22:16 |
you didnt say please! | |
-Aliba- |
posted on 26th Mar 03 at 22:12 |
Simple question: |