|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » arch rolling can it be done!!! » Post Reply
|
Bart |
posted on 7th Mar 03 at 16:42 |
take your arch off and de-bolt it. | |
KITcorsa |
posted on 7th Mar 03 at 16:34 |
bumpstoppers! how much do they cost??? and do thay come in different sizes?? | |
TOMAS |
posted on 7th Mar 03 at 16:09 |
No but bumpstops will... | |
Gambit |
posted on 7th Mar 03 at 16:08 |
yep it would, bigger bumpstops also will help | |
KITcorsa |
posted on 7th Mar 03 at 15:57 |
no its defo the mettle arch! over grinded back the plastic splat and removed the bolt! might try getting the lip teased out if that dont work just cut the lip off! would a stiff rear spring and damper stop the wheel going down so far over the bumps so wont hit the metal? | |
Gambit |
posted on 7th Mar 03 at 11:40 |
if you've removed the bolts then just give it a good bangin ;) | |
KITcorsa |
posted on 7th Mar 03 at 11:15 |
oh right'o mate! i have e45 offset wheels on my corsa and i get some rubbage on one of the back arches!! what whould be the best solution for this?? cutting off lip! banging lip out! or an adjustable suspention kit set to super solid? or a combination? | |
M2RTY |
posted on 7th Mar 03 at 11:12 |
debolt the arch and take the lip up with a grinder, then seal the bare metal with primer etc | |
Gambit |
posted on 7th Mar 03 at 11:09 |
cross section of a nova & golf arch lip looks like a 'U' and this is what you roll so that it becomes more like 'll' but obvisouly sealed at the bottom! | |
Gambit |
posted on 7th Mar 03 at 11:07 |
no, because there is no inner arch lip to roll as there is on a nova or Mk2 Golf | |
KITcorsa |
posted on 7th Mar 03 at 11:02 |
can corsas have there back arches rolled to help acomadate larger wheels??? i have been given conflicting advise on this so i thought i would just open it up to the floor!! |