|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Exhaust hits Rear beam, Grrrrr!!! » Post Reply
|
Daveskater |
posted on 16th Aug 09 at 19:53 |
:lol: :D Great minds and all that :D | |
Haimsey |
posted on 16th Aug 09 at 19:35 |
quote: Same :cool: Tis easiest way :lol: | |
Daveskater |
posted on 16th Aug 09 at 19:23 |
Basically make the bend in the centre section tighter? Clever :cool: | |
andyc1234 |
posted on 16th Aug 09 at 17:35 |
im down 90 on the back no problems thats with a 2.25 system as well. take the rubbers off the back box and stand on it so it bends it down. then when you put it back on the rubbers the pipe sits higher. simples | |
Daveskater |
posted on 16th Aug 09 at 15:43 |
That's me who put the rubber over the beam :lol: | |
Charlton |
posted on 15th Aug 09 at 13:26 |
im down -100mm on a standard exhaust and i have no problems i just twisted the back box up and then clamped it, lowered the car down and had no problems.:thumbs: | |
DanCorsaBVan |
posted on 14th Aug 09 at 14:58 |
haha ok all good guys, cheers . . ive cable tied rubbers and puit rubber round rear beam witch as all helpd just still does it on bad roads and thought id ask as i wanna go lower and itl obv do it more then..... want a after market ezhaust neway so i shall look into it was just going to get backbox but may be worth getting car back if i get more clearance. . . cheers | |
Root |
posted on 14th Aug 09 at 02:36 |
hammers fix everything, ever.:thumbs: | |
jo1945 |
posted on 13th Aug 09 at 22:15 |
I just cable tied mine up round the tail pipe and hanger, works a treat and mines lowered 60mm. | |
Danwilliams |
posted on 13th Aug 09 at 20:10 |
Smaller rubbers and flash banding in the rear beam. lol | |
M055360 |
posted on 13th Aug 09 at 19:56 |
i got coilovers wound right down and a remus race tube and sportex backbox, mine doesn't hit the rear axle at all just get it properly fitted smaller rubbers (escort ones) and cable ties. some places are just shit at fitting aftermarket exhausts. | |
Terry12 |
posted on 13th Aug 09 at 19:04 |
It's the centre pipe that's the problem, It sits low making the backbox sit lower. | |
Craigy_Boi |
posted on 13th Aug 09 at 18:57 |
make it fit? cut and weld twist it aboout? | |
DanCorsaBVan |
posted on 13th Aug 09 at 18:33 |
ah so am better buying a cat-back exhaust and it should solve my exhaust hitting rear beam ? didnt imagine that they jst bent slightly different there then with more of a U over beam? | |
dan-sport |
posted on 13th Aug 09 at 18:22 |
no mate you need the middle section doing | |
DanCorsaBVan |
posted on 13th Aug 09 at 18:20 |
even just a custom back box will do this? | |
dan-sport |
posted on 13th Aug 09 at 17:27 |
most people have the custom exhaust on so it goes higher over the axle anyway | |
DanCorsaBVan |
posted on 13th Aug 09 at 17:25 |
Noticed few ppl had problem but bracket is turned round in right place, and the rubber pushed on exhaust r cable tied tight... all has helped but still does it, but strting to just put it dwn to my driving and the road i dcided ot drive on haha. gunna get aftermarket bk box neway see if tht dus out doubt it will, and then push comes to shuve get custom bit made to go up in like a U over the beam i guess as i wanna go LOWWWW | |
DanCorsaBVan |
posted on 13th Aug 09 at 17:18 |
Exhaust hits and bangs on rear beam, not blowing yet but will be through soon enough!. Corsa dropped on -60 mm Jamex springs and am getting coilovers next week but this will still happen. but I dont see how some ppl go so low like -100mm etc!?!?! how can they not hit the rear beam or are their exhaust jst constantly on the rear beam and its not too bad? |