|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » xe camshaft torque settings » Post Reply
|
alan-g-w |
posted on 13th May 09 at 14:50 |
Aye, torque setting seems right anyway. | |
Terry12 |
posted on 13th May 09 at 07:32 |
How stupid of me, Yes the are a 13mm nut on mine too. I've only just been handling a head so should know:lol: | |
alan-g-w |
posted on 12th May 09 at 19:18 |
The cam saddles are held down by hex nuts on mine. 13mm iirc | |
george |
posted on 12th May 09 at 18:10 |
na thats on the smallblock xe engines i think mine are 10mm so cheers terry :thumbs::thumbs: | |
Terry12 |
posted on 12th May 09 at 17:38 |
Standard spanner type end is M6 = 10mm M8 =13mm but I think the cam caps are torx aren't they? | |
george |
posted on 12th May 09 at 17:15 |
will more than likely just be a load of thread lock and tight lol. whats m8 and m6 in mm size | |
Terry12 |
posted on 12th May 09 at 16:31 |
Camshaft sprocket bolt is 3 stage | |
Terry12 |
posted on 12th May 09 at 16:30 |
Cam bearing caps are 20Nm for the M8 bolts and 10Nm for M6. | |
george |
posted on 12th May 09 at 16:19 |
in need of the torque settings for the cam caps and the pully bolts. |