|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » how low shall i go?please help! » Post Reply
|
Rob R |
posted on 3rd Jun 03 at 22:38 |
17s with e45 offset on a 40mm drop, no probs at all even with 4 in back seats (yes i no that aint legal!!) | |
Fear |
posted on 3rd Jun 03 at 22:36 |
check this post out for similar topic: | |
daiashthomas |
posted on 3rd Jun 03 at 22:30 |
i know this is an old post but has anyone got pics of 14's or 13's dropped 60mm? | |
Dave Helium |
posted on 15th Feb 03 at 09:47 |
My car is 50mm and i put my 13" wheels when the snow comes down and god does it scrape of every thing!! my 15's r et 35 and dont scuff 1 bit till the alloy is under the arch!! ive done some arch mods though;) | |
SRi_m00k |
posted on 15th Feb 03 at 07:53 |
60 60 60 60 60 60 60 60 60 60 60 60 60...... and so on!!!! | |
davecrook1 |
posted on 13th Feb 03 at 18:50 |
got 60mm on 17's. looks fat!! doesn't rub. due to minor mods on the rear arches. | |
anz |
posted on 13th Feb 03 at 01:56 |
lololol, nice | |
DanielJ |
posted on 13th Feb 03 at 01:43 |
i wudnt recommend droppn 60mm on 14s, i ad 40mm on 13s 4 a few hours an lets jus say i cudnt open the door as it was hittn mostkerbs :lol: | |
anz |
posted on 13th Feb 03 at 01:39 |
ive got 17s et45 on and lowered 60mm, scrubbed a little at first but its stopped now tyre walls have word a little :) | |
Meat-Pie-SRI |
posted on 12th Feb 03 at 19:42 |
get et49 17's and go about 80mm | |
Fear |
posted on 12th Feb 03 at 19:40 |
ive got 16's and a 60mm drop and its ok, but arch mods were needed and it still scrubs slightly but nothing to major!!! ive got the rieger kit on mine and is just high enough for speed bumps but if your going to get a combat kit or similar you will have problems!!! | |
Midnight Black Corsa |
posted on 12th Feb 03 at 12:43 |
Don't know bout everyone else but my birds got 15's with 40mm drop and kit scrapes alot. It depends on how low the kit your planning on is though. | |
carla_sri |
posted on 12th Feb 03 at 12:26 |
hi everyone! |