corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » f15/f13 x14xe /x16xe differences , ive got a really big problem » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

andyc1234

posted on 11th Mar 09 at 22:58

they should fit exactly the same. x14 fly is flat x16 is pot so use different clutch covers but the clutch plate is the same.


gez bay

posted on 11th Mar 09 at 22:09

the f15 defenatley will, not too sure about the f13, i think the f13 is out of the nova?? shorter ratio on the f13 iirc


te17

posted on 11th Mar 09 at 20:57

so overall aslong as i have the x14xe flywheel and matching clutch it fits in both the f15 and f13


gez bay

posted on 11th Mar 09 at 19:33

x14xe and x16xe have the same gear boxes, and the x14xe has a lighter fly wheel so it needs a different clutch iirc


te17

posted on 11th Mar 09 at 19:31

hmm strange , as when i originally recieved the donor 1.6 it had a different flywheel on looked more like a pot type than the flat one im using


andyc1234

posted on 11th Mar 09 at 18:26

yea should just swap straght over no problem. if you can id take it off again and check the bearing and release arm


te17

posted on 11th Mar 09 at 18:10

right where do i start, i bought my x14xe sport and it popped cylinder 4 so i fitted a x16xe into the car using the 1.4's flywheel, a new clutch and the 1.4 sports gearbox which i believe is a f13 ??

that then popped second gear so ive picked up an f15 and mated it to the engine , but now it feels like the clutch is dragging and not disengaging , i have to force it in to gear and it starts to pull / judder with the clutch down and reverse wont engage.

ive adjusted the cable with no luck,
and i know that reverse gear has no syncro mesh so it wont go in if theres clutch drag

so are the x14xe and x16xe flywheels and clutches the same between f15 and f13 gearboxes