corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » eml light on wont rev over 4000 revs idles high aswell » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

SRI-LEE

posted on 9th May 08 at 16:19

is there away for the ecu to forget all the faults stored?


SRI-LEE

posted on 9th May 08 at 06:53

?


SRI-LEE

posted on 8th May 08 at 19:45

ok i messed about with a couple of connectors near the throttle body and the car is idleing perfectly ,but the eml light is still on also when you rev the car the revs like sticks abit then goes back down but if you pull the foot pedal back after you have revved it, its like normal if that makes sense is there like a throttle position sensor on an n reg car or is it most likely to be throttle cable sticking abit? or could this be the problem why the eml light is on? , you lot been great help so far just hope its all sorted by the weekend :) :thumbs:


SRI-LEE

posted on 8th May 08 at 18:49

anyone please lol ?


SRI-LEE

posted on 8th May 08 at 18:30

rite ive fitted this other sensor and it still comes on could the oxygen sensor on the exhaust manifold cause these problems? as i put the manifold off teh other engien i bought on and it already had the sensor in so thought that could be dodgy? or any other ideas people have? any help be great thanks lee


SRI-LEE

posted on 6th May 08 at 17:19

well ive got anouther engine think il take the sensor off that and try it cause it worked for a few seconds put bottom pully on idled perfectly and eml light was off then light came on again and idled at 2500 :(


swedge

posted on 6th May 08 at 16:05

sounds like mine when my crank sensor was fecked


SRI-LEE

posted on 6th May 08 at 07:13

no not at the moment it runs really smooth but when it revs to four thousand splutters alot and goes back down to 2000 revs


andyc1234

posted on 5th May 08 at 22:26

does it not run like crap and misfire? mine did when i forgot to put m crank sensor back on


Rybo

posted on 5th May 08 at 22:10

good boy!!!lol


SRI-LEE

posted on 5th May 08 at 22:08

ok well il put the bottom pully back on tomorrow and check for leaks :D cheers for help


andyc1234

posted on 5th May 08 at 22:03

yes having the crank sensor off is not really good for it. thats why it wont go above 4000rpm. not sure if it will affect idle though


SRI-LEE

posted on 5th May 08 at 21:53

yeah gna try that 2moz just spray wd40 around inlet manifold and all breathers see if i can find out where its coming from, yeah whent round beaves had a look helped me out with most of the vacuum pipes! :D


Rybo

posted on 5th May 08 at 21:30

lee check for air leaks and or split breathers...its a pain but go through what youve done again...did you get to beavers?


SRI-LEE

posted on 5th May 08 at 20:51

whats this paperclip test ive read about?


SRI-LEE

posted on 5th May 08 at 20:40

would having the bottom pully put it on though seems the crank sensor isnt picking up anything??


SRI-LEE

posted on 5th May 08 at 20:21

its got a pipercross filter tried it with both on and off still did same so could be the afm?


Mobby

posted on 5th May 08 at 19:56

afm i had a right stutter at 4000rpm try the air filter


SRI-LEE

posted on 5th May 08 at 19:42

oh sorry mate 1.4 16v x14xe engine :)


flybikeslee

posted on 5th May 08 at 19:41

engine?


SRI-LEE

posted on 5th May 08 at 19:38

just done headgasket on my car and the eml light is on and it also idles around 2-3000 rpm and sumetimes gradually rises, any ideas where i could be getting an air leak or something from? also would having the bottom pully off make the eml light come on seems the crank sensor wont be reading anything:boggle: thanks for any help :) :thumbs: