|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » anybody fitted an uprated fuel pump to corsa c20let? » Post Reply
|
jamie m |
posted on 28th Mar 08 at 20:35 |
yeh was a 1400 16v mate many moons ago, il stick it in again tomoz then, uno your filter on the end did it sleeve onto the pump and have a little locating stud to get the filter in the correct place what did you do with that because it locates the filter so it sticks out the side of the pump housing and it then wont go back in its cradel | |
luke85 |
posted on 27th Mar 08 at 23:00 |
Yeah the pump being a bit shorter makes it a bit loose but I cant see that being a problem, it cant really go anywhere. Was the car multi point injection before you fitted this pump? still fine with me if you want to borrow the wideband :) | |
jamie m |
posted on 27th Mar 08 at 19:05 |
yeh mate i am if thats still ok, i no what you mean by pump in first then filter on but the filter sticks out too far once its on and cannot slide the pump housing back in the bracket, also the new pumps about 10mm shorter than the other one and rattles about inside the housing once fitted? | |
luke85 |
posted on 26th Mar 08 at 22:56 |
I got the sytec one from Chris Astley, its a walbro one in a sytec box. Was it a multi point pump to start with? The pump wont slide into the housing with the filter on the bottom, I put the pump in the housing then pressed the filter on the bottom of the pump sticking out, If you get what I mean. Are you the guty from mig whos gonna borrow my wideband by the way? lol | |
jamie m |
posted on 26th Mar 08 at 20:38 |
sounds like we must have differant pumps mate, the filter on mine sticks out too far and cannot slide it back down into its housing, and as for the black rubber part unsure what bit that is mate? what tank/model car was yours before mate? | |
luke85 |
posted on 26th Mar 08 at 19:31 |
Ive just fitted the walbro pump in mine this afternoon, It helps if you leave the black rubber part on around the bottom of the pump when you fit it. Theres still a little movement in it now but Im sure it will be fine. Hardest part was pressing the filter onto the bottom of the pump | |
jamie m |
posted on 26th Mar 08 at 18:37 |
good you are lol, im ment to be coming down you place saturday to use the rolling road to set my fueling and boost! but want to get this pump on before hand! | |
phil_sutton |
posted on 26th Mar 08 at 18:10 |
That'll be the same as what ive got in mine. Mine didnt fit exactly an I needed to do some work to get it in, however it was that long ago now I have no idea what i did. | |
jamie m |
posted on 26th Mar 08 at 17:43 |
-------------------------------------------------------------------------------- |