corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » c20ne/20seh conversion » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

corsa333

posted on 8th Feb 08 at 20:55

just need the pas mount chassis mount and rubber now then correct?


Limecat

posted on 8th Feb 08 at 20:32

Yes.

The PAS mount fastens on the same side as that above engine mount, just below it!


corsa333

posted on 8th Feb 08 at 08:56

now it all makes sence thanks for the guys just that the above mount looks the same as nearside front mount hence tried fitting their lol hopefully should fit now then still need and extra mount for powersteering do i not ?


Limecat

posted on 7th Feb 08 at 23:08

What who has said?

Basically he is attempting to fit the O/S mount to the N/S of the Corsa as I believe the 2 vertical holes for the rubber mount are equidistant on each side.

Basically he is trying to mount this face to the gearbox when it fits against the block on the drivers side...


ed

posted on 7th Feb 08 at 22:57

I don't really understand what you have said. Try this:

http://c20xe.co.uk/board/viewthread.php?tid=224061


Limecat

posted on 7th Feb 08 at 21:24

I knocked this up for Boosha a little bit back so it may help;



You can see what would be the black mount at the front of the picture.

The mount that is blue in the link is the inner wing mount which is hidden by the front panel in the picture.

The silver one is the rear mount spacer and the 2 blocks are for lowering the tiebars.


Limecat

posted on 7th Feb 08 at 21:19

That black one is the offside block mount.


corsa333

posted on 7th Feb 08 at 20:00

black 1 in last pic http://cgi.ebay.co.uk/corsa-2-0let-conversion-kit_W0QQitemZ230220827750QQihZ013QQcategoryZ72205QQssPageNameZWDVWQQrdZ1QQcmdZViewItem


Limecat

posted on 7th Feb 08 at 19:44

Which kits? Links? Pics?

I have never seen a kit with a gearbox mount, other than the F28 one.


corsa333

posted on 7th Feb 08 at 19:32

was only a quid lol how come all the kits have the front gearbox mount if not needed which drivers side mount will i need then ?


Limecat

posted on 7th Feb 08 at 18:43

Why have you bought a gearbox mount? The only copnversion that needs one is if using an F28 box. Use the original Corsa gearbox mount.


sumner2k3

posted on 7th Feb 08 at 18:30

i use to have a c20ne in my corsa with f16 gearbox and use standard gearbox mounts


corsa333

posted on 7th Feb 08 at 09:41

hi all in process of putting c20ne engine into my corsa i no it aint a redtop just wanted something differant from the knorm

basicly after bit of advice regarding the mounts my corsa is r reg with fluid type powersteering and its body type 2 was told that the redtop mounts are the same but bough the front gearbox mount and it line up with chassis holes but not the front of f16 can any one tell me which set of mounts i require