corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Corsa X16XE coolant pipe diagram » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Nova_mike

posted on 21st Dec 17 at 19:02

Hi I know this is an old thread but I have this same issue, but I can't view the diagram picture as to make reference to the coolant hoses numbered.

Only just dug the corsa out after years of leaving it. All. Even re painted now ect.... but struggling with the pipes around the back to and from the heater matrix and out the back of the water pump 😡

Any body help?? Would be much appriciated !

[Edited on 21-12-2017 by Nova_mike]


Robin

posted on 24th Jan 08 at 15:03

That'll do, cheers.


luke85

posted on 24th Jan 08 at 06:53

Dont have a diagram but from memory goes like this:

From the thermostat to the top of the rad (obviously)

From the other end of the rad to the big plastic pipe to the back of the water pump (pipe 1)

Then at the timing belt end of the engine at the end of the head there is a pipe which comes out of the head and goes into pipe 1, back to the water pump (labelled 2)

Then in the middle of the inlet manifold a pipe comes out of the head and splits, the large pipe is the supply for the heater matrix and the small goes to the throttle (pipe 3)

The other pipe on the throttle returns to the top of the header tank

Then the return from the heater matrix joins pipe 1 and returns to the water pump (labelled 4 where this goes)

then on the gearbox corner of pipe 1 there is another take off, this goes to the bottom of the header tank (labelled 5 for you)

The last one comes from the top of the rad and to the other small pipe on top of the header tank

Flow is straight forward, out of the head via thermostat back into the water pump via pipe 1

out of the head to the heater matrix and throttle at pipe 3

return from the heater matrix pipe 4





Hope that helps


Robin

posted on 23rd Jan 08 at 21:34

preferably with the direction of flow as well.


Robin

posted on 23rd Jan 08 at 21:32

anyone got one? :look: