|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » how hard is it to change a x14xe oil pump? » Post Reply
|
Vaux Lad |
posted on 18th Dec 07 at 22:17 |
quote: Just read that post again, i have the EXACT same oil leak :lol: Runs off the engine mount and around the bottom pully area. Fook knows where its coming from. I thought cam seal, but inside the belt cover is dry. And the cam cover isn't leaking either as far as i can see. | |
lee mitchell |
posted on 18th Dec 07 at 21:40 |
if the leak is that high i wouldnt of thought it would be the pump. may be a cam seal or rocker | |
Vaux Lad |
posted on 18th Dec 07 at 21:20 |
Just normal gasket sealent/Rtv | |
Richardhhha |
posted on 18th Dec 07 at 21:12 |
ok so exhaust manifold off, sump off (needs to be re sieled anyway as is weeping) and a E18..... not to bad then...... any special seelant needed? | |
Vaux Lad |
posted on 18th Dec 07 at 21:05 |
E18 | |
Richardhhha |
posted on 18th Dec 07 at 21:01 |
pump is fine, just trying to get the bottom pully off thats the hard bit...... any advise on how to get it off? | |
Dave A |
posted on 18th Dec 07 at 11:23 |
if the belt is off its easy. about 6 bolts holding it on just get a new metal gasket when you fit the new one. if the pump is fine just replace the gasket and crank end seal. | |
Richardhhha |
posted on 18th Dec 07 at 10:16 |
evening everyone. Ok got a bit of a oil leak, running off the back of the front engine mount, have striped the drive belt off and also the tensioner and am prity sure its the oil pump leaking. Anyone got any ideas weather this is a pig to do or not? |