|
|
|
Not logged in [Login - Register] |
 |
You Are Not Registered Or Not Logged In |
|  |
|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Steering column removal » Post Reply
|
| phil_sutton |
posted on 21st Oct 07 at 18:38 |
quote: thats a joke right? Its is easy with the dash out but taking the dash out in order to remove the steer column is like to trying to kill someone with a spoon, i.e there are better ways. Remove the knuckle on the bottom and then the 13mm bolt on bracket that points up, then there is a 13mm nut right at the top. The next bit is to either tap the last bolt in round with a chisel / centre punch as it has no head on it as such or lift the wheel up an push down hard an it should slide off the bracket. | |
| Robbbbb |
posted on 21st Oct 07 at 10:17 |
Thought that might be the case! cheers for the reply. | |
| Dave A |
posted on 21st Oct 07 at 09:34 |
take out the dash and its an easy job. | |
| Robbbbb |
posted on 20th Oct 07 at 14:28 |
Just wondered how anybodys managed removing the steering column on a corsa b (non PAS), I can see how its fixed in but theres no way can i get to it?! There looks to be a single nut at the bottom of the cage type thing holding it to the car close to the pedals which i cant for the life of me get to and 2 fixings holding it in to the top end of the column (steering wheel end) just below the dials, one of which is easy to undo the nut on but the other one doesnt even seem to have a nut on it?! just some sort of round head pin thing, i'm majorly confused and any help would be amazing :) |