|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Removing rusted exhaust bolts? » Post Reply
|
vx.racing |
posted on 16th Jun 07 at 15:25 |
Angle grinder. | |
corsasriboy |
posted on 16th Jun 07 at 10:19 |
wd40,knock smaller socket on.think mine were 14mm bolts,then used 1/2 inch socket.dont hit it too hard or u WILL damage the manifold and head. | |
dan-h |
posted on 15th Jun 07 at 19:55 |
wd40, six sided sockets, heat it up, if not just drill the fooker out. lol | |
Dee |
posted on 15th Jun 07 at 15:27 |
Spit on them | |
johnhara1 |
posted on 15th Jun 07 at 14:27 |
soak them in wd40 | |
RCS |
posted on 14th Jun 07 at 16:38 |
Try tightening them slightly first. | |
fuju64 |
posted on 14th Jun 07 at 15:32 |
blow torch, seriously....it works. it just gets all the rust off it enuf to undo it. takes a while tho. thats what i used to take off my rust back box bolts. | |
Vaux Lad |
posted on 14th Jun 07 at 00:23 |
LOL | |
Ben ev |
posted on 13th Jun 07 at 23:51 |
hammers are the tool of the pikey! if you have to drill them use some easy outs and should come piece op | |
Vaux Lad |
posted on 13th Jun 07 at 23:50 |
Hammer a slightly smaller socket on. | |
VegasPhil |
posted on 13th Jun 07 at 23:43 |
I got a breaker bar and a 6 sided socket on mine. | |
andyc1234 |
posted on 13th Jun 07 at 23:43 |
mole grips? | |
Scotty C |
posted on 13th Jun 07 at 23:38 |
Drill them out if your rounding if off. | |
ChrisBoom |
posted on 13th Jun 07 at 23:37 |
Im taking my exhaust off tomorrow for some welding, but the bolts at the downpipe are really rusted, and the socket just wont grip. Is there a easier way to take them off? |