corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » vauxhall 1.6 engine rebuild » Post Reply

Combe Tickets

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Poot

posted on 29th Jan 07 at 21:48

Fook me...100 for rings?? there are only 3 on each piston :|

UPDATE got the pistons out via taking big ends off, and the psiton rings are all fine, yet the measure the exact ring end gaps, but all look fine 'n dandy, as do the bores.

Any idead as to cause of the problem? Was burning oil like hell on start up, lots and lots of blue smoke, seffo burning it. Valves (inlet) coated in oil, also inlet and throttle butterfly all floating in oil, as were the injectors.

Valve stem seals anyone?


D41EOS

posted on 29th Jan 07 at 19:29

hiya im a mechanic and it cost me 117 through work for rings alone... i know tms does rings and a head set not sure but i could be the same as the x16xe and c16xe


Warren G

posted on 29th Jan 07 at 19:00

you got to ask your self, it it worth it?

i asked today, looking at over 100 for rings, 80 for shells, then pistons and a rebore (vauxhall only sell oversize pistons now 0.5mm)

would be cheaper to buy a second hand engine, by about half the price


Poot

Icon depicting mood of post posted on 29th Jan 07 at 18:54

Hi all,
I've started to strip down and rebuild the x16xel engine I have,(Only a matter of time now jas:P) jst looking round for the cost of parts, cant find much on it?

Basically i'll need a new full gasket set, new set of piston rings, and possible pistons too. do bepco do these parts for car engines? prices?

Also...anyone got a ballpark figure for lightening and balancing the crank/bottom ends?

much appreciated:thumbs:

[Edited on 29-01-2007 by Poot]