|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » mantzel fitting guide » Post Reply
|
j7 gkk |
posted on 28th Oct 06 at 17:24 |
started fitting the mantzel today, ive pretty much stripped off what i dont need apart from the egr as it went dark, just wondering what to do witht the pipes that go to the throttle body, can you connect the together? also there was something on the right the side of the upper inlet that has a red plug into it, does that have to go back on? and what do i do withe the wiring loom that goes behind the top of the upper inlet manifold? and where the throttle body used to sit there is a bracket it went onto do i do away with that? cheers | |
j7 gkk |
posted on 26th Oct 06 at 22:52 |
u2ud :thumbs: | |
Dave A |
posted on 26th Oct 06 at 22:45 |
u2u sent | |
j7 gkk |
posted on 26th Oct 06 at 22:40 |
i only live about 10-15mins from rotherham, how much would you be looking at to fit? id rather let someone who knows what ther doing fit it, and youll probably have the hoses i need | |
Dave A |
posted on 26th Oct 06 at 22:36 |
not far, about 1.5 hours. just straight up the m1. | |
j7 gkk |
posted on 26th Oct 06 at 22:28 |
can i connect the throttle body pipe together some how? very tempted to let you fit it, how far from sheffield are you :lol: | |
Dave A |
posted on 26th Oct 06 at 22:23 |
dont bother with the 2 water pipes to the throttle body. pointless and lots of hassle. | |
j7 gkk |
posted on 26th Oct 06 at 22:19 |
has anyone got the total vauxhall feature or courtenays guide? do i need to run two hoses to the throttlebody? and where the vaccum pipe goes into the mantzel mine has a threa there, can i use the one that is already on the vaccum hoes? and when i blank the egr off, do i jsut leave the plug hanging wont it affect the eml? cheers | |
willhouse |
posted on 25th Oct 06 at 10:26 |
quote: same- | |
Corsa E-Tec |
posted on 25th Oct 06 at 09:46 |
Best thing to do is do a search and collect all the posts and pictures and peice them together, thats what i did. | |
Dean_W |
posted on 25th Oct 06 at 08:12 |
This is what i used. I don't know dutch, so i used the pictures. | |
matt_aka_smiler |
posted on 24th Oct 06 at 23:51 |
someone on here had i think a magazine artical for the mantzel which skimmed over what you had to do an it had colored photos i used them when i fitted my dbilas as the instructions for that where crap. cant remeber who it was that had them but i have them if you need them | |
j7 gkk |
posted on 24th Oct 06 at 22:42 |
ive finally got a inlet :D or at least it should be on its way |