corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Speedline centre cap-PLEASE HELP » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

dannycorsa c

posted on 3rd Jun 05 at 17:59

i took the badge off the center of the cap and made the hole alittle bigger on the cap and they then fitted on! that was on a corsa C tho


Nic Barnes

posted on 3rd Jun 05 at 17:15

space anything out 3mm, front or back if you want


RobHayes

posted on 3rd Jun 05 at 04:44

i first used spacers on mine, even with the grease caps off the centre caps still wouldnt sit on flush.
then when i got round to it i hacksawed about 2-3mm off the front and a bit off the back and now they sit on fine no problems


Matt W

posted on 2nd Jun 05 at 22:14

can i use 3mm spacers on front and not back?


James@CCC

posted on 2nd Jun 05 at 22:03

yup. just gonna take me all week hacksawin the bastard :(

[Edited on 02-06-2005 by James@CCC]


Rick Draper

posted on 2nd Jun 05 at 22:00

quote:
Originally posted by James@CCC
Is it ok to just remove the cas on the back? I just dont wanna do it incase it lets in a load of shit.

Also on the front im having trouble cos my 2 litre shafts stick out about an inch too far. Ive been told to just hacksaw it :o


Just cut it off.


James@CCC

posted on 2nd Jun 05 at 21:45

Is it ok to just remove the cas on the back? I just dont wanna do it incase it lets in a load of shit.

Also on the front im having trouble cos my 2 litre shafts stick out about an inch too far. Ive been told to just hacksaw it :o


Matt W

posted on 2nd Jun 05 at 21:39

the back grease caps i managed to get off but the fronts wont budge, is it possible to fit 3mm spacers and make them fit?
thanks


Ojc

posted on 2nd Jun 05 at 21:30

quote:
Originally posted by deanmcreynolds26
quote:
Originally posted by Ojc
For some strange reason I had to fit 3mm spacers on the Nova to make the front ones fit.


shafts 2 long?


Nova shafts, ahh I don't care anyway.


Poot

posted on 2nd Jun 05 at 21:25

Then expect to replace bearings more often :P


ainsley_brader

posted on 2nd Jun 05 at 17:21

just take the grease caps off


deanmcreynolds26

posted on 2nd Jun 05 at 16:50

quote:
Originally posted by Ojc
For some strange reason I had to fit 3mm spacers on the Nova to make the front ones fit.


shafts 2 long?


Ojc

posted on 2nd Jun 05 at 15:23

For some strange reason I had to fit 3mm spacers on the Nova to make the front ones fit.


J20PHL

posted on 2nd Jun 05 at 12:41

yeh i just removed the grease caps then it goes on fine, the backs should just about fit without having to take anything off


Ian

posted on 1st Jun 05 at 22:46

I just removed the caps. You can also bash them down a bit.


James@CCC

posted on 1st Jun 05 at 22:24

it was answered unsatisfactory




I didnt like the answer :(


Rob H

posted on 1st Jun 05 at 22:12

Use the search, it was answered yesterday :|.


Matt W

Icon depicting mood of post posted on 1st Jun 05 at 22:02

ive jst bought some speedline allessio 2s and the centre caps that hide the bolts wont go on as the metal cap on the hup protudes too far out so the caps wont clip on,
how have people overcome this?
cheers :thumbs: