|Not logged in [Login - Register]|
|You Are Not Registered Or Not Logged In|
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Conversion Problem - Please help » Post Reply
||posted on 13th Jan 06 at 23:25|
got one now... just live ground and speed in and out
||posted on 13th Jan 06 at 20:04|
send me your e-mail address and i will send a wiring diagram:thumbs:
||posted on 10th Jan 06 at 22:05|
details please :P
||posted on 10th Jan 06 at 21:51|
its an old post:lol:
||posted on 10th Jan 06 at 21:39|
||posted on 10th Jan 06 at 21:32|
i did it:thumbs:
||posted on 10th Jan 06 at 18:27|
how did you wire in the pickup?
||posted on 1st Jun 05 at 22:22|
lad came today but was unable to bypass the immobiliser, going to get another ecu, chip and transponder and try that, anything else i could try
||posted on 1st Jun 05 at 12:21|
As siberia said chip and transponder have to be matched to the ecu, from the same car. Try as said taping the dam things together
||posted on 1st Jun 05 at 07:35|
earth on the back right of the inlet manifold top (looking from the car front), theres a protruding stud, check it out... i made this mistake twice :lol:
||posted on 1st Jun 05 at 07:17|
its a problem with the chip in the key and the transponder on the ignition barrel... are you sure there are matched ones? I.E they are off the same car....? its either that or they are just no close enough....
||posted on 31st May 05 at 22:28|
it starts but cuts out after 1-2 secs
||posted on 31st May 05 at 22:26|
i take it it wont start then....
||posted on 31st May 05 at 22:23|
immobiliser is in key, transponder is there as wel as the ecu?
||posted on 31st May 05 at 22:22|
imobilser in key?
||posted on 31st May 05 at 22:19|
1.4 16v engine is now in but as soon as u put the key in the engine management light flashes on and off constantly, any1 got any ideas what could cause this