corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Nova dashboard into corsa... » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

neophyterulez

posted on 12th Jan 05 at 19:13

Thanks, only dificult for some words

Think it is possible to take the rear end of the corsa dash and the front of the nova, then use polyester to mould the 2 pieces together, afterwords smoothening and retrim the dash with skai or vinyl.
Think it is possible, but easier for the mk3 dash.

Yes, if you cut a piece of the metal bar, you can bend the rear of the dash to fit it between the side frames of the corsa. If you close the doors, the front of the dash is crushed between the 2 doors.
Looked weird when I closed the 2 doors, saw my dash moving bigtime.
If I do this now, the dash doesn't move anymore.

I have a small problem with fitting the right frame of the heater, it's a little bold, but think it is possible to get 20 kilo on it for a few days and problem solved.

Saw the place where the digi dash is moving also when I closed my doors, but Everything fits nicely without gaps.

Was worth the work, and you have something special


moddedcorsa

posted on 12th Jan 05 at 18:42

your english is very good.

Yes that was the part worrying me, the front of the dash, i was thinking of putting part of the corsa dash in front of the nova one (to fill the curve at the bottom of the window, and somehow make it into a feature, paint it etc?)

So for the mk3 dash, you cut a v out of the strenghtening bar, to allow it to bend a little?
Then close the doors, and squash the dash to fit??
Doesnt this distort the dashboard, making it bulge in places?


neophyterulez

posted on 11th Jan 05 at 19:16

The sides stay on the dashboard.
There is a metal straightening line through the dash from left to right.
If you don't cut that metal line on the side, it is impossible to get the dash smaller.
The material of the dash is not in plastic like the corsa one, more like the astra MK2 one if you know

I've had no problems to get the steering fitted, fits straight on

Think it is impossible to fit the nova dash because to get the middle against the window, you have to cut A LOT on the sides, so much that it would be impossible to get the dash fitted of the fuse box, steeing frame, and even thing the heater also.

Hopy you understand my not so correct english:thumbs:


moddedcorsa

posted on 11th Jan 05 at 18:17

cheers mate, very helpfull.

How did u join the sides back again after u shortened the dash?

The main thing im worried anout is getting the front of the dash to meet the window (as nova dash is fairly straight, corsa is curved)

And getting the steering cowling on correctly.

neophyterulez, do you know of anydody that has put a mk2 nova dash into a corsa?


neophyterulez

posted on 10th Jan 05 at 20:26

For everyone


You need to cut a lot from the sides as the corsa dash is round and the astra is oval.

Best thing is to cut a small piece and try to fit.

You neet to cut a V out of the metal lower part of the dash, because the dash is 4 cm wider.

It is possible that the dash only fits with a lot of force on the sides.
No prob, close the doors for a few days and the dash will keep its shape.

Best way to work also is with your front window out.
Easier to fit the dash.

The middle bold on the dash needs to be longer also.

Don't know about the wiring as for my whole electronics comes out of an astra MK3

So, for me it was easier to fit it

Took me about a day to fit it, a week to keep the doors closed

Hope I was clear, if you have any probs. do not hesitate to mail or U2U me.

Greetz,
;)


moddedcorsa

posted on 10th Jan 05 at 19:06

thanks alot mate! that looks great! Very different!

could you u2u me with whats involved and some general tips etc that would be excellent


neophyterulez

posted on 9th Jan 05 at 19:17

I've uploaded 3 pics of my astra MK3 dash in my corsa (with digi dash)

http://users.pandora.be/neophyterulez/

greetz,
;)


moddedcorsa

posted on 9th Jan 05 at 18:03

thanks


ed

posted on 9th Jan 05 at 16:04

quote:
Originally posted by moddedcorsa
If the nova dash proves 2 much for me, Can anybody shed any light on fitting the nova gsi 6 dial instrument pannel/speedo?

If it physically fits,(all the dials being visible, due to the big curve at the bottom of the corsa speedo/dial housing)

Would the wiring be difficult, due to having ouil pressure gauge, batt guage etc etc?? (wiring to a c20xe)

[Edited on 08-01-2005 by moddedcorsa]

Will fit, similar shape to a digi dash an they fit... You will need the appropriate sensors to get the dials to work. Voltage doesn't need a seporate sensor - that is doen by an internal voltmeter. Oil pressure is done using a oil pressure sender - they screw into the sump plug. You will need the looms from the Nova dash to plumb it into the Corsa. If the speedo is electronic then you will need the speed sender from the gearbox too and pop it into your gearbox. All the wiring should be colour for colour so you shouldn't have too many problems...


neophyterulez

posted on 9th Jan 05 at 16:00

Best to do the astra Mk3 dash
reason
On the rear of the nova dash, on the window, the line is straight
On the corsa Dash, it is round
On the mk3 dash, it is oval.

MK3 dash is not in plastic, and rather flexible

Think it is impossible to get a nova dash in a corsa


Joff

posted on 8th Jan 05 at 23:49

quote:
Originally posted by J100RSA
quote:
Originally posted by Joff
If you're changing the dash, fit a Cav digi dash ;)


u find 1 of there been looking for years and still no luck




I had one but binned it.










joke



moddedcorsa

posted on 8th Jan 05 at 23:03

any1?


moddedcorsa

posted on 8th Jan 05 at 15:21

If the nova dash proves 2 much for me, Can anybody shed any light on fitting the nova gsi 6 dial instrument pannel/speedo?

If it physically fits,(all the dials being visible, due to the big curve at the bottom of the corsa speedo/dial housing)

Would the wiring be difficult, due to having ouil pressure gauge, batt guage etc etc?? (wiring to a c20xe)

[Edited on 08-01-2005 by moddedcorsa]


moddedcorsa

posted on 8th Jan 05 at 15:17

quote:
Originally posted by J100RSA
quote:
Originally posted by Joff
If you're changing the dash, fit a Cav digi dash ;)


u find 1 of there been looking for years and still no luck


oops read that wrong, didnt read the all important "digi" word
You are right, never saw a cav digi dash, Do they actually make them?

apart from astra mk2, ive only seen, monza, and senator digi dash's


J100RSA

posted on 7th Jan 05 at 23:50

quote:
Originally posted by Joff
If you're changing the dash, fit a Cav digi dash ;)


u find 1 of there been looking for years and still no luck


moddedcorsa

posted on 7th Jan 05 at 23:44

quote:
Originally posted by Joff
Yes, whole thing.

Just give it a go dude, plenty of people do dash swaps in VW's.


I will deff look into it, certainly different.


Cav dashboards r fairly easy to get hold of, my donor car is gonna b a mk3 cav sri.


ed

posted on 7th Jan 05 at 23:40

quote:
Originally posted by Joff
If you're changing the dash, fit a Cav digi dash ;)

Have fun finding one.


Joff

posted on 7th Jan 05 at 23:26

Yes, whole thing.

Just give it a go dude, plenty of people do dash swaps in VW's.


moddedcorsa

posted on 7th Jan 05 at 23:02

quote:
Originally posted by Joff
Astra Mk3 dash is also much nicer than the Corsa B.


Or why not try an Audi A3 dash :|


yes very true, but just that the nova is similar width to the corsa.

Just to make shure im clear, im thinking of fitting WHOLE nova dash board to a corsa b:thumbs:

I know it will be alot of work, just things like steering wheel position, will the doors close ok, without leaving any horible gaps? etc etc

Shurely sum1 in europe has done it b4:boggle:


Joff

posted on 7th Jan 05 at 22:55

Astra Mk3 dash is also much nicer than the Corsa B.


Or why not try an Audi A3 dash :|


Joff

posted on 7th Jan 05 at 22:55

If you're changing the dash, fit a Cav digi dash ;)


ed

posted on 7th Jan 05 at 22:54

You could fit the complete dash if you wanted to. The cars are basically the same dimensions. Just be prepared to chop brackets off and make new ones as they are probably not identical, but they wont be too disimilar though.


moddedcorsa

posted on 7th Jan 05 at 21:33

Hi, im soon building a corsa, with c20xe, slightly rally themed etc.

But, i would like the dash to be a bit different, so instantly thought... MK2 Nova dash :thumbs: imo much nicer than corsa, but will it require major surgery, and new brackets etc, any1 done it b4?

Ive seen a nova with corsa dash, just not the other way about.:D


FAILING THAT.......

any1 fitted the nova gsi 6 dial instrument pannel/speedo? As digi dashes etc can be fitted so thought this might fit aswell.
If it physically fits, Would the wiring be difficult (wiring to a c20xe):thumbs:

thanks