|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Rebuilding an engine! » Post Reply
|
James R |
posted on 1st Feb 04 at 00:49 |
IT would be a bare bottom end and head, all the pulleys etc... would need fitting. Plus a egie shop should be able to do it for you for 500notes. | |
Siberia |
posted on 31st Jan 04 at 22:09 |
i was reading on MIG that u can bring your engine to vauxhall and they will give a completely reconned one for £800 | |
luca2020 |
posted on 31st Jan 04 at 17:54 |
yer i did say that, i ment the kit comes with heavy duty rod bolts, apart form that thats all the internal work ull need for 200bhp | |
James R |
posted on 31st Jan 04 at 17:40 |
quote: You didn't say that before. A ported head is better than dropping in cams. you'll keep the bottom end and gain the top end, as apose to looss botom to gain top with cams. Std cams are fine for 200BHP. And with PAS/alternator will certainly make less than 200BHP. Ask on migweb what power ppl get off the 208kit. | |
luca2020 |
posted on 31st Jan 04 at 17:30 |
The kit comes with ARPs, and i know the 208 wont make 208 excatly, probley more like just under 200 with a decent exhaust manifold and system | |
James R |
posted on 31st Jan 04 at 17:01 |
The 208 kit doesn't make 208 in the car. And you do need to drop in ARP's to get the revs up enough, 8k on std rod bolts, I don't think will last. Take a std engine and drop tb's on and ARP's you'll be looking at 185-195. | |
luca2020 |
posted on 31st Jan 04 at 16:46 |
:lol: sorry where did i say it was 150bhp standard??? | |
PaulW |
posted on 31st Jan 04 at 16:41 |
quote: :lol: sorry... 150bhp standard j1400 has the right idea :thumbs: | |
James R |
posted on 31st Jan 04 at 16:34 |
List would be roughly: | |
luca2020 |
posted on 31st Jan 04 at 16:31 |
u wont need to do anything to it for 200bhp, just a usual service like cam belt and rollers, oil filter and oil ect will do fine | |
deanmcreynolds26 |
posted on 31st Jan 04 at 16:24 |
i want to mod it to get approx 200bhp what should i do! before tb's to make the engin solid??? | |
James R |
posted on 31st Jan 04 at 14:51 |
You haven't said what your doing to it, it you'll keep it std then just a std rebuild would be fine, if you want to rinse 230+BHP out of things are different | |
deanmcreynolds26 |
posted on 31st Jan 04 at 12:28 |
im gona get myself a C20XE and was wondering wat is needed to rebuild but im talking about uprating as well??? |