|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » alloys on a 5dr » Post Reply
|
Kris TD |
posted on 23rd Jan 04 at 19:57 |
yep they would | |
Shane |
posted on 23rd Jan 04 at 19:44 |
kris would 16" fit on a 5 door no problems if the et is 45-49???????? | |
Shane |
posted on 23rd Jan 04 at 18:22 |
kk thanx | |
Kris TD |
posted on 23rd Jan 04 at 18:17 |
et 45-49 you will need. | |
Shane |
posted on 23rd Jan 04 at 18:15 |
so wat ofset would fit would these 195/50/15?? | |
Kris TD |
posted on 23rd Jan 04 at 18:11 |
tomas, mine are 5 door corsa gsi skirts same as rich's. | |
Kris TD |
posted on 23rd Jan 04 at 18:10 |
there is no clip on them, there are 10mm bolts on the back, you undo them and the arch comes off. | |
Mav 3000 |
posted on 23rd Jan 04 at 17:15 |
GSI Same as mine - theyr tip top :) | |
TOMAS |
posted on 23rd Jan 04 at 16:07 |
Kris what skirts are they now? Im STILL looking for a subtle skirt that is a proper good direct fitment for the 5door... | |
Kris TD |
posted on 23rd Jan 04 at 13:51 |
if you are prepared to remove the plastic arch trims at the back which takes like 2 mins, and instead of bolting them back on use a trim adheasive where the top 2 bolts would go, if you live anywhere near hertford ill help you, will take like 20 mins max. | |
Kris TD |
posted on 23rd Jan 04 at 13:29 |
mine down 60mm on 17's | |
IntaCepta |
posted on 22nd Jan 04 at 23:48 |
what offset are ur alloys gonna be? | |
M4rk P |
posted on 22nd Jan 04 at 23:05 |
where in herts are you from :) im from hertford. | |
Shane |
posted on 22nd Jan 04 at 23:00 |
nice 1 m8 cheers | |
M4rk P |
posted on 22nd Jan 04 at 22:59 |
my bro had 17's lowered 60mm with no scrubbing but he did loads of work. mine is lowered 40mm and im getting my 16's saturday so ill tell you then if it scrubs. | |
Mav 3000 |
posted on 22nd Jan 04 at 22:55 |
16s if you lower it - mines 30mm, 16s, ET49 and no problems. more probs with ET45 or less. | |
Shane |
posted on 22nd Jan 04 at 22:53 |
ok wats the biggest size wheels i can get on my 5 dr without n e work needed??? |