corsasport.co.uk
 

Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » Leccy Windows etc » Post Reply

Post Reply
Who Can Post? All users can post new topics and all users can reply.
Icon:
Formatting Mode:
Normal
Advanced
Help

Insert Bold text Insert Italicized text Insert Underlined text Insert Centered text Insert a Hyperlink Insert Email Hyperlink Insert an Image Insert Code Formatted text Insert Quoted text
Message:
HTML is Off
Smilies are On
BB Code is On
[img] Code is On
Post Options: Disable smileys?
Turn BBCode off?
Receive email notification of new replies?

Mav 3000

posted on 17th Jan 04 at 12:26

Well you've got two options really:

1) Get hold of the looms for the doors and the car and spend a day swapping them over

2) make your own looms and hope your wiring skills are up to the job with the doors, fuse box, power sources and everything else. I've no idea how you'd do this (ie feeding wiries through from door to door for example unless you have all different coloured wires.

It may pay to bin the mirror idea and get a third party leccie window kit and bridge off a permanent live already in or near the doors.


Darren

posted on 17th Jan 04 at 01:11

lol, right ive got all the wireing diagrams and feeling pretty confident just dunno best way of getting the wires into the car!! i have absolutly no loom for windows or mirrors in the door or car


Mav 3000

posted on 16th Jan 04 at 21:46

Do you fancy making multi-plugs?? :lol: In theory it works but in practise its not worth it!

I swapped the entire loom to avoid this!


greengoddess

posted on 16th Jan 04 at 21:15

Sorry Mav just re read ur post. If you dont have the loom in the car side you can follow the haynes manual and wire it urself up to fuse box and then up to multiplug at the door.Then u would need the leccy loom in door to wire up to using test lamp/multimeter as said above.


greengoddess

posted on 16th Jan 04 at 21:11

Am i right in saying if you connect a battery to one end of one of the wires going to window switch for instance, you should be able to use a multimeter to see which wire it is in the multiplug, or use one of those screwdrivers with a test lamp inside?


greengoddess

posted on 16th Jan 04 at 21:08

yes i meant the metal connectors, and yes would be very time consuming but not impossible.


Mav 3000

posted on 16th Jan 04 at 20:48

Greengoddess what do you mean by 'the cable clips that go into the connector from halfords'? do you mean the small metal clips that plug into the multi-plug?

I was told that that is an option, but it would take about a day PER plug due to complexity (theres more than one blue wires for example - one for mirrors, one for windows)

Plus, Ipswich Corsa said that theres no wiring for the windows in the CAR (not sure if they realise i mean inside the car not the doors but...) this means even if they plug the wires to the car from the door, there will be no corresponding wires on the other side to go the fusebox or other door etc.

Read my guide for more info.


greengoddess

posted on 16th Jan 04 at 19:41

if you can get the cable clips that go into the connector from halfords then u can wire the leccy windows urself. Just follow the wiring diagram in the haynes manual and make sure you match up the correct wires to each other, and that u have all the parts needed.I'm going to try this myself when i can find money/source parts.:thumbs:


Darren

posted on 16th Jan 04 at 18:06

mav, nah i havent got the wiring in the car. just not sure how to run the wires through!!


Mav 3000

posted on 16th Jan 04 at 17:53

If you've got the wiring in your car itself - just buy the door harnesses from a scrappie and pug in - job done. If you've not go the loom forget about it.

search for my posts on this in this forum for the long version :)


Darren

posted on 16th Jan 04 at 16:47

My car does not have the loom already installed so whats the best way of running the wires through the door into the car?? im guessing maybe drilling a hole and putting a grommet or something in??

any other suggestions??