|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » replace headlight unit » Post Reply
|
Danz_Corsa |
posted on 14th Jan 04 at 00:07 |
on my 95 corsa - i had to remove the bolt thru the front bumper to the wheel trim and then a couple undoing the bolt from the wheel arch. | |
Nath |
posted on 13th Jan 04 at 23:53 |
The electronic adjuster is a little black unit that pops out of your old light unit then straight into your new one. It may not feel like it'll come out but you just gotta be forceful. | |
Dave |
posted on 13th Jan 04 at 23:51 |
I dont think you can, the electric adjustment is an integral part of the light. | |
5doormodder |
posted on 13th Jan 04 at 23:49 |
What about the electronic adjustment thingy. I have a set of clear euro lights RHD spec and want to change them over, but i dont know how to do the electric adjustment on them | |
Siberia |
posted on 13th Jan 04 at 22:57 |
yeh i seen the fella down in vauxhall get the headlight out in 5 mins 2 or 3 bolts | |
the_legend_of_yrag |
posted on 13th Jan 04 at 21:39 |
I fitted my new smoked headlights in 15 minutes the other day!!! Unclip all lights undo two bolts and slide out, slide new one in, connect up lights make sure they working correctly and bolt back on!! :thumbs: | |
Bonzai |
posted on 13th Jan 04 at 21:09 |
well its 93 and drivers side. it better be easy peasy now then :D | |
Nath |
posted on 13th Jan 04 at 21:01 |
Absolutely no need to remove bumper if its a post97 corsa. I didnt, as Joff said it takes literally 15mins. Only bugger is reconnecting wires on the passeneger side light, if youve got arms like ET it'll be easier. | |
Ryan L |
posted on 13th Jan 04 at 20:53 |
on my 94 corsa u don't need to remove the bumper just 3 bolts i think | |
Bonzai |
posted on 13th Jan 04 at 19:17 |
mine is pre facelift but that shouldnt make a difference surely :boggle: will have a crack on friday then. only thing that worried me particularly was that haynes manual says upon removing the nut under the arch to change the nut... :boggle: | |
Joff |
posted on 13th Jan 04 at 19:12 |
Why are you people even TOUCHING the bumpers?? | |
PaulW |
posted on 13th Jan 04 at 18:49 |
unbolt the bumper, 3 bolts on bottom, one under each wheel arch & 2 on top | |
Bonus |
posted on 13th Jan 04 at 18:48 |
It aint that much work. Didnt take arch trim off when i did mine. | |
Bonzai |
posted on 13th Jan 04 at 18:18 |
looks like a lot of work in the haynes manual, including taking off the wheel arch trim??? and loosening the bumper :boggle: |