|
Not logged in [Login - Register] |
You Are Not Registered Or Not Logged In |
Corsa Sport » Message Board » Help Zone, Modification and ICE Advice » New headlights - help! » Post Reply
|
TOMAS |
posted on 7th Jan 04 at 10:36 |
Yeah, im assuming thats what you are talking about. Not all Corsa's have them, mine does though. You should have a switch near the light switch inside the car. If you roll the switch down/up you should hear the BIG BLACK BLOCKS making a wirring noise. They are little motors with a stick on that moves in/out to adjust the light if you carry lots of weight in the back, pretty useless though if you are lowered more than 40mm on hard springs :thumbs: | |
the_legend_of_yrag |
posted on 6th Jan 04 at 18:18 |
quote: Are they what changes the dip of the light then? | |
the_legend_of_yrag |
posted on 6th Jan 04 at 18:16 |
quote: I mean when fixing the lights back onto the car.... | |
TOMAS |
posted on 6th Jan 04 at 17:41 |
Ahh the electric adjusters... You have to pull and they come out with a pop. Just ensure its unscrewed first by a quater twist and just pull it as hard as you can squarely though. It WILL pop out, dont be affraid, and watch your hand when it does as you'll end up mashing it into the slam pannel like me :look: | |
cobra148 |
posted on 6th Jan 04 at 17:31 |
quote: Screwed in?? You must be doing something wrong, theres no screw in parts. | |
the_legend_of_yrag |
posted on 6th Jan 04 at 16:58 |
Yer not the H4 bulb with the clip, but the big black block thing?? It twists round and should pop out, as the other one did, but the right hand side one dont. | |
TOMAS |
posted on 6th Jan 04 at 16:46 |
Their should be a little shark fin on the very outside of the lights where the lense meets the black plastic casing, the lights need to be jiggled around with to properly locate the fin on the bracket inside of the actual wing, you will feel it from inside the bay. | |
the_legend_of_yrag |
posted on 6th Jan 04 at 16:16 |
Plus when i went to fit my left handside one, the top screwd in ok, but the other bracket was no where near the hole :boggle: tried wiggling it around but it seemed in the correct position... | |
Adam-D |
posted on 6th Jan 04 at 16:09 |
apply a little more pressure see what it snagging on | |
the_legend_of_yrag |
posted on 6th Jan 04 at 16:07 |
ttt | |
the_legend_of_yrag |
posted on 6th Jan 04 at 15:49 |
Anyone??? Ive got the left side light one out but the right aint budging | |
the_legend_of_yrag |
posted on 6th Jan 04 at 15:32 |
Changing over to smoked lights, but cant get the bulb in the big block thing out the hole, dont want to yank it out incase i break it anyone know what i can do?? |